Handleiding Festool LEX 3 125 3 (pagina 14 van 101) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins)

499937

Verklein

Vergroot

Pagina terug

1/101

Pagina verder

LEX 3

noring warning notes and instructions may re-

sult in serious injuries.

– Only trained and qualified persons are per-

mitted to set up, adjust and operate this

compressed air tool. Persons without the rel-

evant qualifications and training are more

likely to cause accidents.

– This compressed air tool may not be modi-

fied. Modifications may reduce the effective-

ness of safety devices and pose a greater risk

to operating personnel.

– Keep all of the attached documents and pass

on the documentation if the machine changes

ownership.

– Never use a damaged compressed air tool.

– Regularly inspect compressed air tool. The

compressed air tool must be marked with

clearly legible rated values and markings. Re-

placement signs can be ordered from the

manufacturer.

Danger from ejected parts

– In the event the workpiece, accessory or ma-

chine parts break parts may be ejected at

high speed.

– Wear impact-resistant protective goggles.

– Wear a helmet when doing overhead work.

Also assess the risks for other people.

– Secure the workpiece. Use clamping devices

or a vice to hold the workpiece firmly.

Risk of getting caught

– Wear suitable protective clothing! Do not

wear loose clothing or jewellery. They can be

caught by moving parts. Wear a hair net if

you have long hair.

Risks during operation

– Wear protective gloves.

– Operating and maintenance personnel must

be physically strong enough to handle the

size, weight and power of the machine.

– Hold the machine correctly. Prepare to coun-

teract normal or sudden movements - hold

the machine with both hands.

– Avoid abnormal posture. Ensure secure

stance and keep your balance at all times.

– Enable the command device for starting and

shutting down in case of an interruption to

the energy supply.

– The machine can only be operated with abra-

sives which were developed for this purpose.

– Wear protective goggles, protective gloves

and protective clothing.

– Check sanding pad before each use. Do not

use the sanding pad if it is torn, broken or has

fallen.

– Avoid direct contact with the sanding pad.

Wear suitable gloves as protection.

– Never use without an abrasive.

– Risk of an electrostatic discharge if the com-

pressed air tool is used on plastic and other

non-conductible materials.

– Potentially explosive atmosphere: If explo-

sive or self-igniting dust is produced during

sanding of certain materials, the processing

instructions of the material manufacturer

must be observed under all circumstances.

Risk through repeated movements

– The use of the compressed air tool may cause

unpleasant sensations in the hands and arms

of the operator, as well as in the neck and

shoulder area or other body parts.

– Adopt a comfortable posture. Change posture

if working continuously.

– If symptoms such as malaise, complaints,

throbbing, pain, tingling, numbness, burning

or stiffness occur inform your employer and

consult a doctor.

Risk as a result of accessory parts

– Disconnect the compressed air hose from the

compressed air supply. In the event of non-

use of the compressed air tool, before main-

tenance and when changing insertion tools.

– Avoid contact with the insertion tool during

and after use.

– Always use original accessories.

– Grinding wheels and cutting-off wheels are

not permitted.

– The permissible rotational speed of the ac-

cessory must be at least 1,000 rpm higher

than the maximum speed specified on the

machine. Accessories that rotate faster than

the permissible level can rupture.

– Self-adhesive abrasives must be attached

concentrically on the sanding pad.

Risk at work station

– Slipping and tripping hazard! Pay attention to

slippery surfaces and tripping hazards as a

result of air pressure hoses.

– Not intended for use in explosive atmo-

spheres and not insulated against contact

with electrical power sources.

– Proceed with caution in unfamiliar surround-

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Festool LEX 3 125 3 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info