779800
34
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
Kapitelüberschrift
32
Cutting particle boards
-To prevent raw edges when cutting particle boards, do not set the saw blade higher than 5
mm above the workpiece thickness.
When you are finished cutting
1. First turn the table saw off and then the dust extractor. The saw blade will
continue to rotate for some time.
2. Remove the cutting waste from the saw blade when the saw blade returns to the rest-
ing position.
3. Disconnect the table saw from the power supply by pulling the mains plug out of the
socket.
4. Let the table saw cool off completely.
Releasing the overload protection
This table saw is equipped with overload protection. If the motor has overloaded, the overload
switch automatically deactivates it to protect the table saw from overheating.
1. If the overload protection has been activated, switch the table saw off.
2. Wait until the engine has cooled down.
3. Press the overload switch (9) and switch the table saw on.
Removing jammed material
m WARNING! Risk of injury!
Incorrect handling of the table saw poses a risk of serious injury.
-Immediately switch the table saw off and pull the mains plug out of the socket if the saw
blade catches in the workpiece or any other blockages occur.
-Use protective gloves. Do not touch the saw blade with your bare hands.
Changing the saw blade (Fig. 9/15)
m WARNING! Risk of injury!
Incorrect handling of the table saw poses a risk of serious injury.
-Ensure that the table saw is not connected to the mains supply.
-Use protective gloves. Do not touch the saw blade with your bare hands.
1. Turn the saw blade to the maximum position out of the saw table.
2. Remove the saw blade guard (4) from the riving knife (34).
3. Remove the table insert (A) with a screwdriver (not included).
4. Make sure that the angle adjustment of the saw blade is set to 0°.
5. Place the saw blade spanner (25) on the saw blade flange (I) and one spanner (25) at
the fixing nut (J).
Operation
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferrex DX254TS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferrex DX254TS in de taal/talen: Engels als bijlage per email.

De handleiding is 4.35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info