724603

Ferrex DM46P-DO160 Handleiding

37
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
10852
161CC 4 STROKE
PETROL
LAWN MOWER
User Manual
Product
Info
https://help.tools/
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
IM Ed5 10/2019
QR codes take you where you want to go
quickly and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tarif you may be charged for the connection.
Product
Info
Contents
Pack contents /parts 2
Description of Symbols 3
General Safety Warnings 4
Safety Rules for Petrol Lawn Mowers 7
Additional Safety Warnings for Petrol Lawn Mowers 14
Parts List 16
Quick Start Guide 18
Assembly 20
Attaching the Lower Handles 20
Attaching the Upper Handle Bar to the Lower Handles 21
Assembly of the Hard Catcher 22
Attaching the Hard Catcher 22
Cutting Height Adjustment 23
Preparation 24
Adding and Checking the oil 24
Fuelling 25
Operation 26
Starting the Engine 26
Speed Control 26
Stopping the Engine 26
Emergency Stopping 27
Important Primer bulb information 28
Mowing Advice 28
Engine tipping 29
Poor engine performance 29
Maintenance 30
Replacing the Blades 30
Air Filter Maintenance 31
Spark plug Maintenance 32
Periodic Maintenance 33
Transporting and Storage 34
Service Support 35
Accessories and After Sales parts 35
Warranty 36
Environmental protection 36
What your 3 year warranty means 36
Troubleshooting 37
Specications 38
National Service Agent Listing 39
2 3
Pack contents / parts
Congratulations on the purchase of your FERREX® 4 Stroke
Petrol Lawn Mower. When you open your packaging, rst remove all
items and check there are no parts damaged or missing. If you nd
anything wrong, do not operate the product until the parts have been
replaced or the fault has been rectied. Failure to do so could result in
serious personal injury.
Intended use of the Petrol Lawn Mower
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
This product is suitable for private home use i.e for use in home and
gardening environments, for the application of mowing.
IMPORTANT INFORMATION
NOTE: This is a 4 stroke Lawn Mower.
The motor MUST be lled with 350ml of SAE 10W/30 BEFORE starting.
Fresh unleaded fuel must be used in this unit.
Do NOT use Ethanol based fuels. Do NOT mix oil with fuel.
NOTE: First time users or inexperienced operators pay particular
attention to the operation of the Lawn Mower, including details of
starting and stopping and correct use of the Lawn Mower on pages 22-25.
Contents of carton
1 x Lawn Mower
1 x Spark Plug Spanner
1 x Hard Catcher (not tted)
1 x Cable Clip (not tted)
2 x Upper Handle Locking Levers
(not tted)
2 x Lower Handle Locking Knobs
(not tted)
1 x Instruction manual including
Quick Start Guide &
Service listing
1 x Warranty Card & details
2 3
The rating plate on your lawn mower may show symbols. These represent
important information about the product or instructions on its use.
Conforms to relevant standards for electrical safety
and electromagnetic compatibility.
Wear hearing protection. Wear eye protection.
Wear breathing protection.
Wear safety footwear.
Wear safety gloves.
Warning.
Read these instructions for use carefully.
Use at a distance of at least 15m from other people.
Thrown objects can cause severe injury.
Explosive material.
Extremely hot surface. Do not touch a hot muer, gear box
or cylinder, you may get burned. These parts get extremely
hot from operation and remain hot for a short time after the
unit is turned o.
Before carrying out any operation stop the engine
and disconnect the spark plug.
Risk of hand and feet injuries.
Noise label rating 96dbB(A) (taken at 4.0 metres).
You must wear ear protection at all times.
Description of symbols
4 5
General safety warnings
Safety instructions
WARNING Read and understand all instructions.
Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury. The term
“power tool” in all of the warnings below refers to your
mains-operated (corded) power tool, garden power tool,
battery-operated (cordless) power tool or your petrol
operated garden tool.
Save these instructions
Work area
• Ensure the area to be mowed is clear and free of debris,
rocks, gravel, garden furniture etc.
• Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Ensure all animals, children and bystanders are at least
15m away while operating this lawn mower. Distractions
can cause you to lose control.
4 5
Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
• Use safety equipment. Always wear eye protection. Safety
equipment such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached to a
rotating part of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on
6 7
and o. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
• Turn tool o completely before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may aect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type
of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations dierent from intended could result in a
hazardous situation.
Service
• Have your power tool serviced by a qualied repair
personnel using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
6 7
Safety Rules for Petrol Lawn Mowers
Training
• Read the instructions carefully. Get familiar with the
controls and proper use of the equipment.
• Only use the lawn mower for the purpose for which it was
designed, i.e. for cutting and collecting grass. Any other
use can be hazardous, causing damage to the machine.
• Never allow children or people unfamiliar with these
instructions to use the lawn mower. Local regulations may
restrict the age of the operator.
• Never use the lawn mower:
– When people, especially children, or pets are nearby in
the mowing area.
– If the operator has taken medicine or substances that
can aect his ability to react and concentrate.
• Remember that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
Preparation
• While mowing, always wear sturdy footwear and long
trousers. Do not operate the equipment when barefoot or
wearing open sandals.
• Know your controls. Read the owners manual carefully.
Learn how to stop the mower in an emergency.
• Thoroughly inspect the area where the equipment is to be
used and remove all objects which may be thrown by the
8 9
machine or damage the cutter assembly and the engine
(stones, sticks, metal wire, bones, etc.)
WARNING: DANGER!
Engine fuel is highly ammable:
–
Store fuel in containers specically designed for this purpose.
– Refuel using a funnel and outdoors only. Do not smoke
while refuelling or whenever handling the fuel.
– Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine is
running or when the engine is hot.
– If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until the fuel has
evaporated and the vapour dispersed.
– Replace all fuel tank and container caps securely.
• Before use, always inspect the machine, especially the
condition of the blades, and check that the screws and
cutting assembly are not worn or damaged. Replace
worn or damaged blades and screws in sets to preserve
balance.
• Damaged blades and worn bolts are major Hazards.
• Check all nuts, bolts and screws often. Always be sure
the mower is in a safe operating condition. Use only
replacement parts and guaranteed by the original
manufacturer of your mower.
• Discharge openings must be guarded at all times. Do not
remove the discharge guard or hold it up while mowing.
• It is advisable to wear suitable eye protection when
operating the mower.
•
Do not overspeed the engine or alter the Governor setting.
8 9
Excessive speed is dangerous and shortens the life of the
mower.
Operation
• Do not operate the engine in a conned space where
dangerous carbon monoxide fumes can collect.
• Mow only in daylight or good articial light.
• If possible, avoid operating the equipment in wet grass.
• Always be sure of your footing on slopes.
• Walk, never run and do not allow yourself to be pulled
along by the lawn mower.
• Mow across the face of slopes, never up and down.
•
Exercise extreme caution when changing direction on slopes.
• Do not mow on slopes of more than 20°.
•
Exercise extreme caution when pulling the lawn mower towards you.
• Stop the blade if the lawn mower has to be tilted for
transportation when crossing surfaces other than grass, and
when transporting the lawn mower to and from the area to be
mowed.
• Never operate the lawn mower with defective guards, or
without safety devices, such as the stoneguard and/or
grass-catcher, supplied by the manufacturer in place. Replace
if damaged.
• Do not change the engine governor settings or over speed the
engine.
• On power-driven models, disengage the drive clutch before
starting the engine.
• Start the engine carefully, following the instructions and
keeping feet well away from the blade.
• Do not tilt the lawn mower when starting the engine.
10 11
Start the engine on a at surface that is free of obstacles
and tall grass.
• Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
• Never pick up or carry a lawn mower while the engine is
running.
• Stop the engine and disconnect the spark plug wire:
– Before carrying out any work underneath the cutting
deck or before unclogging the chute;
– Before checking, cleaning or working on lawn mower;
– After striking a foreign object. Inspect the lawn mower
for damage and make repairs before restarting and
operating the lawn mower;
– If the lawn mower starts to vibrate abnormally (nd
and remove the cause of the vibration immediately).
• Stop the engine:
– Whenever you leave the lawn mower unattended
even for a moment.
– Before refuelling.
– Every time you remove or replace the grass-catcher.
• When mowing, always keep to a safe distance from the
rotating blade. This distance is the length of the handle.
• Never cut grass while walking backwards.
• Stop the engine before pushing mower across gravel
drives, walks or roads.
• This machine is to be used exclusively for cutting
natural grass.
Never use the mower for other purposes. Any other
utilization can involve danger for your safety and can
involve damage to the mower.
• The user is responsible for the safety of other people,
10 11
animals and objects in the working area. Keep children
and domestic animals at a safe distance while the
mower is in use.
Maintenance and Storage
• Keep all nuts, bolts and screws tight to be sure the equipment
is in safe working condition. Regular maintenance is essential
for safety and performance.
• Store the mower in a well-ventilated room away from naked
ames such as may be found in hot water heaters.
• Allow the engine to cool before storing in an enclosed space.
• To reduce the re hazard, keep the engine, exhaust silencer,
battery compartment and fuel storage area free of grass,
leaves, or excessive grease. Do not leave containers with grass
cuttings in rooms.
• Check the stone-guard and grass-catcher frequently for wear
and deterioration and replace if damaged.
• If the fuel tank has to be drained, this should be done outdoors
and when the engine is cool.
• Wear strong work gloves when removing and reassembling
the blade.
• Check the blade’s balance after sharpening.
• For reasons of safety, do not use the equipment with worn or
damaged parts. Parts are to be replaced and not repaired. Parts
that are not of the same quality can damage the equipment
and be dangerous for
your safety.
• Replace worn or faulty silencers.
• Whenever the machine is to be handled, transported or tilted
you must:
– Wear strong working gloves;
12 13
– Grasp the machine at the points that oer a safe grip, taking
account of the weight and its distribution.
• Damaged blades and worn bolts are major hazards.
• Fuel goes o in about 3 - 4 months. If you nd your mower
does not start, try changing the fuel in the tank with newly
purchased fresh unleaded fuel. Do not use ethanol based
fuels.
Operation Safety Instructions
WARNING: Stop the engine and unplug the spark plug
before any repairs or maintenance operations.
• Check that all nuts, bolts and screws are well tightened before
every use.
• Before mowing ensure that the blade and the blade xing
screw are securely fastened. When the blade edges require re-
sharpening, this must be done evenly on both sides to prevent
any imbalance. If the blades are damaged, it must be replaced.
• When mowing always wear long trousers and strong, covered
footwear.
• Do not run the engine in an enclosed and/or poorly ventilated
area. The gas of the engine contains carbon monoxide, which
is dangerous to your health.
• Work only when there is sucient light.
• Do not use the lawn mower when it is raining or when the
grass is wet.
• Caution must be taken while mowing on slopes. Mow across
the face of slopes, never down or up.
• Turn o the engine if you must leave the lawn mower
unattended.
• Never lift the rear of the mower while starting the engine and
never place your hands and feet underneath the deck while
12 13
the engine is running.
• If working on high grass, adjust the mowing height to reduce
the friction and prevent over loading. The optimal mowing
height should be 1/3 the height of the grass. It would aect
the work eciency of lawn mower if too much higher or lower.
• Never change the rated speed of the engine in any way .
• Never lift or carry the mower while the engine is running.
• Stop the engine and remove the spark plug cover in these
cases:
- Before any operation under the deck.
- Before any maintenance, repairing or checking operations.
- Before carrying, lifting or removing the mower.
- If you leave the mower unattended or change the cutting
height.
- After hitting a foreign object, stop the engine and check
thoroughly the mower in order to see if it is damaged. Take
the mower to an authorised service centre to carry out any
repairs if necessary.
- If the mower vibrates in an abnormal way, take the mower to
an authorised service centre.
- Check the bolts and nuts regularly. Bolts and nuts may
vibrate loose over time.
14 15
WARNING:
Fuel is highly ammable.
• Store fuel in a cool place in a container specically designed for
the purpose. In general, plastic containers are unsuitable.
• Fill the fuel tank with a funnel and outside. Do not smoke or use a
mobile phone during this process.
• Fill with fuel and oil before starting the engine. Never open the
cap of the fuel tank to add fuel while the engine is running or still
hot.
• Do not start the engine if there is spilt fuel on the mower or in the
area surrounding. Take the mower away from the zone where fuel
has been split and avoid any contact from a hot source as long as
the split fuel is completely evaporated.
• Tighten the fuel tank cap and fuel can cap tightly.
Additional Safety Warnings for Petrol Lawn
Mowers
• Never allow young children to operate power tools or equipment.
• Make sure children and pets stay indoors while you’re working.
• Before starting up the lawn mower, walk the area. Relocate toys,
hoses, rocks and sticks. Debris such as stones, wood chips and pieces
of aged blades can be propelled at high speeds, which can cause a
fatal accident.
• Check lawn mower blades regularly. Look for damage, bends and
dullness. Blades should be replaced every year or two, depending on
usage.
• Slow down and take care when mowing around corners, trees,
shrubbery or other obstacles.
14 15
• Leave the mower deector chute in the manufacturer-set position.
• Don’t modify equipment – it may aect your warranty as well as
make the product unsafe.
• When operating any power tools or equipment (no matter the size),
wear closed-toe, slip-resistant shoes, safety glasses, strong gloves, a
hat and ear protection. Cover your skin as much as possible.
• Never underestimate the power of handheld equipment, especially
chainsaws. Use the same amount of caution as you do for larger
equipment.
• Wait until the equipment has cooled completely before lling with
fuel or attempting any repair or maintenance.
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
16
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Parts List
1. Upper handle bar and handles
2. Variable speed throttle control
3. Variable speed switch cable
4. Cable Clip
5. Upper handle locking Lever/s (x 2)
6. Lower handles
7. Hard catcher
8. Lower handle locking knob/s (x 2)
9. Lower handle mounting plate/s (x2)
10. Rear discharge guard
11. Catcher attachment bracket
12. Catcher attachment bar
13. Rear wheel/s (x2)
14. Fuel tank
15. Fuel tank cap
16. Recoil starter
17. Oil ller cap/dipstick
18. Spark Plug Spanner
19. Motor
20. Air lter
21. Air lter cover
22. Priming bulb
23. Fuel bowl drain screw
24. Spark plug cover / Spark Plug
25. Front wheel/s (x2)
26. Bar blade
27. Blade bolt
28. Height adjustment lever
20
18
12
11
4
3
Parts List
10
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
17
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
25
7
17
13
28
8/9
2
6
25
24
22
19
21
15
1
27
23 26
28
8/9
Parts List
6
5
16
14
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
18
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Assembly
NOTE: Always refer to the full instruction detail and read all Safety
Instructions. Only use this guide as a checklist.
1. Attaching the Lower Handles (Fig B, C, & D)
Refer to page 16 for full instructions.
2. Attaching the Upper Handle Bar to the Lower Handles (Fig E/F)
Refer to page 17 for full instructions.
3. Assembly of the Hard Catcher /
4. Attaching the Hard Catcher (Fig H/K)
Refer to page 18 for full instructions.
Quick Start Guide
C.B. D.
TIGHTEN
LOOSEN
E. F.
TIGHTEN
LOOSEN
K.H. L.
LOWER
RAISE
5. Cutting Height
Adjustment (Fig L)
Refer to page 19
for full instructions.
Quick Start Guide
E.
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
19
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Preparation
6. Adding and Checking the oil (Fig M/N/O)
(Always use good quality 4 stroke engine oil.
We recommend SAE 10W/30. Refer to page 20 for full instructions).
7. Fuelling (Fig Q) - Refer to page 21 for full instructions.
Operation
8. Starting the Engine (Fig R,S,T) - Refer to page 22 for full instructions.
Quick Start Guide
N.
O.
HIGH
LOW
CORRECT
LEVEL
M.
TIGHTEN
LOOSEN
Q.
OPEN
T.S.R.
X 3
- Use fresh unleaded fuel.
- DO NOT use ethanol based fuels
(Warranty will be void if the
engine becomes faulty due to
insucient oil and fuel level).
Quick Start Guide
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
20
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
W
ARNING: Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
WARNING: DO NOT attempt to start this mower without rst adding
0.35L of SAE 10W/30 engine oil to the Engine.
WARNING: Do Not attempt to start this mower without the mower
rst being FULLY assembled.
It is necessary to t the 2 x lower handles (6), upper handle bar (1), and hard
catcher (7) to the mower. (Fig A)
Attaching the Lower Handles
NOTE: The variable speed switch cable (3) is connected to the upper handle
bar (1). Be careful not to tangle the cable when removing the lawn mower
from the box, and during the upper and lower handle assembly.
1. To attach the 2 x lower handles (6), rst remove the 2 x lower handle
locking knobs (+ bolt/s & curved washer/s) (8) from your accessory bag.
Place the lower handle/s in position by rst aligning one of the lower
handle ends on the inner side of the lower handle mounting plate (9).
2. Once in position, insert the bolt on each side through the lower handle
mounting plate (Fig B) and then through the lower handle (6). (Fig C)
Repeat with the opposite side handle.
3. Once the bolts are loose in position, t the plastic curved washer, then
Assembly
A.
2 X SETS OF UPPER
HANDLE LOCKING LEVERS
2 X SETS OF LOWER
HANDLE LOCKING KNOBS
Assembly
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
21
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
screw the lower handle locking knob (8) over the plastic curved washer
and secure by turning clockwise until tight and secure. (Fig D)
Attaching the Upper Handle Bar to the Lower Handles
1. Before positioning the upper handle bar (1), check if the orientation of the
upper handle bar is correct, which can allow the variable speed switch
cable (3) to run down the upper and lower handles to the engine. Ensure
the cable is not tangled in any way. (Once assembly of the upper handle
bar is complete, the cable clip can be used to secure the variable speed
switch cable (3) into position). (Fig E)
2. Once the upper handle bar is correctly
orientated for assembly to the lower handles (6),
apply the upper handle locking levers (5) (from
accessory bag) into position on the outer sides
of the upper handle bar (1) loosely (Fig F). When
both upper handle locking levers (5) are both in
position, secure and tighten.
G.
E.
C.B. D.
TIGHTEN
LOOSEN
Assembly
F.
TIGHTEN
LOOSEN
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
22
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Assembly of the Hard Catcher
WARNING. Ensure the motor is o and
not operating when undertaking this task.
1. The hard catcher (7) is supplied in two sections.
Locate the top half on top of the bottom half and
interlock them together by aligning the clips on
the top half of the catcher into the raised ridge
around the bottom half of the catcher, then push
the halves together until they click into place. (Fig H)
Attaching the Hard Catcher
WARNING. Ensure the motor is o and not operating when
undertaking this task.
1. Lift the rear discharge guard (10) in order to position the catcher. (Fig I)
NOTE: DO NOT ever start the mower if the rear discharge guard (10) does
not fully return to the close position if the catcher is not tted.
2. Apply the hard catcher (7) by aligning the catcher attachment bar (12) on
the catcher over the catcher attachment bracket (11) centrally so the catcher
is sitting evenly. (Fig J)
3. Release the rear discharge guard (10) to secure the catcher in place. (Fig
K)
NOTE: Always empty the hard catcher (7) before it has reached maximum
I.
Assembly
H.
3. Apply the cable clip (4) (from your accessory bag) to ensure the cable is secure
in position and not tangled. (Fig G)
capacity, otherwise it will decrease the
performance of the mower.
TIP: Do not leave clippings in the catcher for
extended periods.
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
23
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Cutting Height Adjustment
WARNING: Stop the engine and unplug
the spark plug before any repairs or
maintenance operations.
This mower has one lever to easily adjust the
cutting height. There are 7 height settings.
1. Stop the engine of the lawn mower before
making a height adjustment. To decrease the
cutting height pull the height adjustment lever
(28) out and move it up a notch, towards the handlebar. (Fig L)
2. To increase the cutting height, pull the height adjustment lever (28)
out and move it down a notch, towards the engine. (Fig L)
3. After adjustment, ensure the lever is fully
located in the selected notch.
NOTE: If you are unsure of which cutting height to use, begin with a high
setting and trial a small section of lawn, then check the appearance of the
lawn. Then readjust if necessary.
L.
LOWER
RAISE
Assembly
K.
J.
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
24
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Preparation
Adding and checking the oil
IMPORTANT: The motor of this mower is packed with NO OIL in the motor.
Prior to starting the motor, Oil MUST be added to the sump of the motor.
Failure to add sucient oil will result in damage to the motor which is NOT
covered under the warranty of the mower.
On a new mower, the motor needs to be lled with 350ml of SAE 10W/30
engine oil.
Each time the mower is used, the oil level should be checked and if low, add
sucient oil to ensure the oil level is to the full mark on the oil dipstick (17).
1. Position the lawn mower on a at and level surface. Clean the area directly
around the oil ller cap (17).
2. Remove the oil ller cap (17) by unscrewing it in an anti-clockwise
direction, and lift the cap outwards (Fig M).
Clean the oil dipstick (17) with a clean cloth, cleaning away any visual oil.
NOTE: The cap is a full threaded t.
3. FOR A NEW MOWER, add 350ml of SAE 10W/30 engine oil. Before replacing
the dip stick / ller cap, allow a minute or so to allow the oil in the ller tube
to fully drain of oil.
4. For both a new mower and also a previously used mower, measure the
amount of oil in the motor by re-inserting the oil dipstick back on top of
the ller tube, BUT DO NOT screw the cap in place.
5. After a few seconds, remove and inspect the oil level on the bottom of the
oil dipstick (17). (Fig N)
6. The oil level should be between the low and maximum marked section of
the oil dipstick (17) (Fig O). If the oil level is sucient replace the oil cap by
inserting and screwing back in the oil ller tube in a clockwise direction
until rm.
7. If the oil level is insucient, i.e. the oil level is not on the marked section of
the oil dipstick (17), add further oil in 50ml intervals and repeat steps 4, 5, 6,
and 7 until the correct oil level is obtained.
Always ensure the oil ller cap (17) is rmly locked in place before the
motor is started. Do not over ll with oil above the maximum mark.
Only use SAE 10W/30 engine oil.
Preparation
N.
O.
HIGH
LOW
CORRECT
LEVEL
M.
TIGHTEN
LOOSEN
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
25
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Fuelling
WARNING: Do not rell fuel tank while engine is running or is hot.
Ensure the motor is switched o before undertaking this task.
IMPORTANT: Fuel goes o after about 3-4
months. If you nd your mower does not
start, rst change the fuel in the fuel tank (14) with
newly purchased fuel and open the fuel bowl drain
screw (23) for approximately 5 seconds to drain out
any old fuel from the motor.
1. To open the fuel bowl drain screw (23), use a
10mm spanner (not supplied), and loosen the
drain screw in an anti-clockwise direction to
remove the screw (Fig P). Fuel should drain from
the bottom of the bowl.
2. To reseal the fuel bowl drain screw (23), replace
the screw and using a 10mm spanner (not
supplied), tighten the drain screw in a clockwise
direction until rm and the discharge stops.
• Be careful not to admit dust, dirt, water or other
foreign objects into the fuel.
• Wipe o spilt fuel thoroughly before starting
engine.
• Ensure you DO NOT put fuel in the lawn mower in close proximity to any
open ames, lit cigarettes, or hot objects.
NOTE: Do not use ethanol based fuel. Use fresh unleaded fuel.
1. Unscrew the fuel tank cap (15) in an anti-clockwise direction (Fig Q), and
pour fresh unleaded fuel into the fuel tank (14) with the aid of a funnel.
2. Fill the tank to approximately 2.5 cm below the lowest portion of the neck
to allow for fuel expansion. Be careful not to over ll.
3. Be careful not to spill any petrol. If this happens, wipe the spill with a
clean rag.
4. Start the engine at least 3 metres away from the area where the fuel tank
(14) has been lled in order to avoid the risk of re.
WARNING: Never attempt to refuel the engine while it is running
or still warm, allow it to cool before fuelling.
P.
TIGHTEN
LOOSEN
Preparation
Q.
OPEN
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
26
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Operation
Starting the Engine
Take note of the following warnings before starting your lawn mower:
• Never allow young children to operate power tools or equipment.
• Make sure children and pets stay indoors while you’re working.
• Before starting up the lawn mower, walk the area. Relocate toys, hoses, rocks and
sticks. Debris such as stones, wood chips and pieces of aged blades can be propelled
at high speeds, which can cause a fatal accident.
• Slow down and take care when mowing around corners, trees, shrubbery or other
obstacles.
• Wear closed-toe, slip-resistant shoes, safety glasses, strong gloves, a hat and ear
protection. Cover your skin as much as possible.
• Ensure upper and lower handle locking levers and knobs are secure.
NOTE: Before starting the lawn mower, check the oil and fuel levels.
Warranty will be void if the engine becomes faulty due to insucient oil and fuel levels.
Ensure the mower is set to the highest height setting so the blade is not resting deep
into the grass.
1. Push the variable speed throttle control (2) downwards to the engine. (Fig R)
2. Depress the priming bulb (22) fully 3 times. (Fig S)
3. Pull the recoil starter (16) lightly until you feel resistance then pull quickly until the
engine starts. (Fig T)
Do not pull the cord with a jerk or release it until fully rewound.
Speed Control
The variable speed throttle control (2) can be used to adjust the speed of the lawn
mower (Fig U).
To increase the speed, slowly push the variable speed throttle control (2) downwards to
the engine.
To increase speed, slowly raise the variable speed throttle control (2) upwards to the
upper handle bar (1).
NOTE:
Fully raise the variable speed throttle control (2) upwards towards the upper
handle bar (1) to stop the engine.
Stopping the engine
To stop the lawn mower engine, fully raise the variable speed throttle control (2)
upwards towards the upper handle bar (1). (Fig V)
Operation
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
27
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
EMERGENCY STOPPING
In the event the variable speed throttle control (2) does not stop the engine,
the following processes will assist.
NEVER move the mower, or attempt to move the mower if the
controls DO NOT turn o the motor.
DO NOT attempt to lift or tip the mower on its side.
1. In the event the variable speed throttle control (2) does not turn o the motor,
press the primer bulb fully approximately 10 times or continue to push the
primer until the engine stalls.
2. If this fails to stop the engine, remove the spark plug cover from the spark
plug (24).
IMPORTANT: If the spark plug method is used, it is recommended to wear
a rubber glove when grasping the spark plug cover.
Persons with heart conditions or any medical condition which can be
aected by electric shock should not attempt this method.
3. NOTE: If the above methods do not stop the mower, let the mower
continue to run until the tank runs out of petrol.
- DO NOT Panic.
- DO NOT put your ngers anywhere near the cutting deck.
- DO NOT leave the mower unattended if the run down method is used.
Operation
T.S.R.
X 3
V.U.
DECREASE SPEED
INCREASE
DECREASE
INCREASE SPEED
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
28
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
When the motor has stopped, the fuel should be drained from the fuel tank
(14), spark plug cover (24) removed (if not already removed), and the mower
must NOT be restarted until the problem has been xed by an Authorised
Service Agent (Refer to page 28 for information relating to nding your nearest
Service Agent).
Important priming bulb information
The priming bulb (22) pump is designed to deliver fuel directly into the engine
for easy start.
Follow these guidelines and you should have trouble-free starting.
For rst starting at the beginning of the mower session, pump the priming
bulb (22) 2-3 times. DO NOT EXCEED 3 pumps.
To restart a cold engine i.e. after the engine has started and run for just a short time, you
will only need to pump the priming bulb (22) once.
DO NOT EXCEED 2 pumps.
To restart a hot engine, you will not need to pump the priming bulb (22) at all.
NOTE: If you over pump the engine, it will not start.
DO NOT re-pump the engine priming bulb (22).
Continue to pull the recoil starter (16) and after a number of pulls the engine will start.
Mowing Advice
1. The speed of the motor is governed to a factory pre-set speed and the motor will try and
maintain this speed during use. If the speed of the engine slows this could indicate the
mower is being overloaded, by trying to cut too much grass or the catcher may be full.
Try mowing a narrower strip, mowing slower, raising the cutting height or emptying the
catcher. Grass also should not be cut if the grass is wet.
2. Before mowing always check and clear the grassed area for all foreign objects, especially
solid ones semi-concealed in the ground such as rocks, stumps and garden stakes.
3. Sharp blades cut cleanly and eciently, if the blade is dull it will tear the grass. This will
result in the ends turning brown. When the blades no longer cut cleanly either sharpen
them or replace them.
4. To safely operate the mower ensure all four wheels are on the ground and be careful
not to lose your footing or control of the mower. Be very careful when mowing uneven
or rough ground. Keep a rm grip on the handle bar at all times, always walk, never run
with the mower.
Operation
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
29
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Engine tipping
When cleaning, or performing any maintenance
such as replacing the blades, it is very important that
the mower is only tipped backwards (Fig W). Failing
to do so will result in the engine oil owing into the
cylinder and muer making starting very dicult if
at all. Should this occur, the mower should be taken
to a mower repair shop which is not covered under
warranty.
Poor engine performance
Should the engine idle or run rough at full speed with excessive bluey/black
smoke emanating from the muer, it is possible that either the engine was
slightly tipped incorrectly . If the mower had previously been tipped, allow the
motor to run for a few minutes and the excess oil will burn out.
If the engine is not running at full speed, STOP the mower, check the fuel is
fresh, check the oil level, and also inspect under the deck to ensure there is no
buildup of grass.
Check the spark plug (24).
If the mower continues to underperform, take the mower to your nearest
authorised Service Agent (Refer to page 35 for information relating to nding
your nearest Service Agent).
W.
Operation
5. For healthy growth, grass should not be cut too short. The grass will remain healthier,
greener and require less watering.
6. Vary your cutting pattern from week to week, this will help to prevent matting and
graining of the grass.
7. Be aware of any local or national restrictions when using this appliance.
This could include, but not restricted to, times of operation, location of operation, or
work place operation.
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
30
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Maintenance
Replacing the Blades
Note. Before making any adjustment or maintenance procedures to the
mower ensure it is turned o and the spark plug lead is removed.
Note. Wear heavy gloves to protect your hands.
1. Tilt the mower back (Fig W) so the spark plug (24) is facing up, and
disconnect the spark, by pulling spark plug cover (24) o.
2. Whilst securely holding the bar blade (26) with gloves on, use a 17mm
spanner (not supplied) to undo the blade bolt (27). (Fig X)
3. Remove the bar blade (26), and be careful not to slide the blade adaptor
o and dislodge the key on the shaft. (Fig Y)
4. Clean dirt and grass from around the blade mounting area.
5. Replace the bar blade (26), ensuring you hold onto the adaptor whilst
tightening the blade bolt.
IMPORTANT: Ensure the two drive lugs on the adaptor are engaged in the
two holes in the blade. (Fig Z)
6. Tighten the blade bolt tightly (40-50Nm). (Fig X)
Check lawn mower blades regularly. Look for damage, bends and dullness.
Blades should be replaced every year or two depending on usage, or when
they become worn and no longer cut the grass cleanly.
The performance of grass catching can also reduce if the blade become
worn. Replacement blades are available for purchase from
https://help.tools/ or by calling 1300 889 028.
Z.Y.X.
TIGHTEN
LOOSEN
Maintenance
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
31
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Maintenance
Air Filter Maintenance
WARNING: Ensure the motor is switched o
before undertaking this task.
IMPORTANT: A dirty air lter (20) will restrict air ow to the carburettor.
To prevent carburettor malfunction, service the air lter (20) regularly.
Check that the air lter (20) is clean and dry of dirt.
Filters thick with debris will not allow the engine to breathe and result in
dicult starting and poor engine performance.
The air lter (20) should be checked after approximately 25-50 hours of use,
or annually.
1. Open the air lter cover (21) by pushing in the rear
tab to release the clip, and then pushing the cover
back and away to release the 2 front clips and the
full air lter cover (Fig AA).
2. Remove the foam element (Fig AB).
3. If the air lter (20) is excessively dirty, replace with
a new lter.
4. Wash the air lter (20) in liquid detergent and
water. Then allow it to thoroughly air dry.
5. Reinstall the air lter (20) and put the air lter
cover (21) back on ensuring the clips are securely
in place.
CAUTION: Never use fuel or low burning paint
solvents to clean the air lter (20). A re or explosion
could result.
CAUTION: Ensure the air lter (20) is dry before
retting.
Replacement air lters are available from https://help.tools/
or by calling Customer Service on 1300 889 028.
AA.
AB.
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
32
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Maintenance
Spark Plug Maintenance
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is rmly
tted to the top of the spark plug.
CAUTION: If the engine has been running, the muer will be very hot.
Be careful not to touch the muer.
WARNING: Ensure the motor is switched o before undertaking
this task.
1. Remove the spark plug cover, then remove the spark plug using the supplied
spark plug spanner (18) in an anti-clockwise direction, and clean any
deposits.
2. Visually inspect the spark plug (24). Discard the spark plug if there is apparent
wear, or if the insulator is cracked or chipped.
3. Check that the end of the spark plug (24) is not blackened by carbon build
up. Clean with a soft wire brush if necessary.
4. Measure the plug gap with a feeler gauge. Correct as necessary by bending
the side electrode. The gap should be 0.7 - 0.8mm.
5. Thread the spark plug (24) in by hand to prevent cross-threading.
6. Once the spark plug (24) is seated, tighten with the supplied spark plug
spanner (18) to compress the washer.
NOTE: When installing a new spark plug, tighten 1/2 turn after the spark plug
(24) seats to compress the washer.
NOTE: When reinstalling a used spark plug, tighten 1/8-1/4 turn after the spark
plug (24) seats to compress the washer.
CAUTION. The spark plug (24) must be securely tightened. An improperly
tightened spark plug (24) can become very hot and may damage the engine.
The spark plug (24) should be changed after approximately 25 hours of use,
or annually. Replacement spark plugs are available from purchase from lawn
mower or small engine repair shops, or online purchase is available from our
website https://help.tools/
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
33
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Maintenance
Periodic maintenance
Item Remarks
Pre-operation
check (daily)
Initial 1
months
or 20Hr
Every 3
months
or 50Hr
Every 6
months
or 100Hr
Every 12
months
or 300Hr
Spark plug
Check condition, adjust gap and
clean. Replace if necessary.
Engine oil*
Check oil level.
Replace (Fuel goes off after
about 3-4 months)
Air filter
Clean. Replace if necessary.
Fuel*
Check fuel level.
Blade/s
Replace when it become worn
and no longer cuts the grass
cleanly. (dependent upon
regularity of use)
Upper and
Lower handle
locking knobs /
levers
Check before using the lawn
mower.
Catcher
Empty clippings when the
catcher is 3/4’s full.
Fittings,
fasteners,
screws, bolts,
Ensure secure and in good
condition.
Regular maintenance is most important for the best performance and safe operation. Failure to periodically maintain the
condition of your lawn mower which results in malfunction of the lawn mower will void warranty.
* Dispose of used engine oil / fuel in a manner that is compatible with the environment. We suggest you take it in a sealed
container to your local service station for reclamation. Do not throw it in the trash or pour it into the earth.
Periodic Maintenance
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
34
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Transporting and Storage
Transporting
CAUTION: If the engine must be tipped to transport equipment or to inspect
or remove grass, keep the spark plug (24) upwards. Transporting or tipping the
engine spark plug down may cause:
• Smoking
• Diculty starting
• Spark plug fouling
• Oil saturation of the air lter
Ensure the storage area is free from excessive humidity and dust.
Drain the fuel tank (14) and carburettor.
It is recommended to remove the spark plug cover during transportation and
storage.
WARNING: Fuel is extremely ammable and explosive under certain
conditions. Do not smoke or allow ames or sparks in the area.
NOTE: Be aware to not hit or cut the fuel tank (14) while you are transporting.
Storage
• When you nish working, clean the engine completely, making sure there is
no grass or dirt on the engine.
• Store the engine away from direct sunlight.
• At the end of the season, give the engine an overall cleaning and a
thorough check.
• Whenever the machine is not used for a long period of time, proceed
as follows:
• Empty the fuel tank (14) completely.
• Empty the Carburettor bowl of all fuel.
• Protect all metal engine parts from corrosion by coating them with oil.
• Remove the spark plug (24), put a few drops of oil into the cylinder and then
pull the recoil starter (16) 2 to 3 times in order to distribute the oil evenly.
Replace the spark plug (24). This closes the valves, and protects them from
dust and corrosion.
Transporting and Storage
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
35
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Service Support
• If storing the lawn mower back inside the box during non-use, loosen the
upper handle locking levers (5) so the upper handles can be folded, as well
loosening and removing the lower handle locking knobs (8) so the lower
handles can be removed from the lower handle mounting plates (9). Put the
lower handle locking knobs (8) back on the lower handles so they are not
lost during storage.
• Coat areas that may rust with a light lm of oil. Cover the engine and store it
on a level surface in a dry, dust free area.
• Ensure the cable is not tangled or folded in any way during storage.
If you have any issues with the operation of your product, please take it with a
copy of your receipt to one of our National Service Agents for repair. A listing of
our Service Agents is included at the back of this manual, however, you can also
nd our most updated listing by visiting https://help.tools/
and clicking on the Service Agent link.
Accessories and After Sales parts
Should you nd the following accessories are
worn or past their user life, replacements can
be purchased online via our website
https://help.tools/
3. Spark plug (LG F7RTC)2. Air lter (10852-AF)
1. Bar Blade (10852-BL)
4. Recoil Starter (10852-RS)
If you have any queries regarding these accessories,
please call us on our Customer Service Line - 1300 889 028.
Service Support
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
36
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Warranty
Warranty
Your new FERREX® 4 Stroke Petrol Lawn Mower will more than satisfy your
expectations. It has been manufactured under stringent FERREX® Quality Standards
to meet superior performance criteria.
You will nd your new 4 Stroke Petrol Lawn Mower easy and safe to operate, and,
with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before using your
new FERREX® 4 Stroke Petrol Lawn Mower.
Take special care to heed the Cautions and Warnings.
Your FERREX® Stroke Petrol Lawn Mower has many features that will make your
job faster and easier. Safety, performance, and dependability have been given top
priority in the development of this 4 Stroke Petrol Lawn Mower, making it easy to
maintain and operate.
Use only FERREX® replacement parts for your product. Non-conforming parts or
modications made to parts will void your warranty, as well as make the product
unsafe to use.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local
recycling centre and disposed of in an environmentally safe way.
Dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local service
station for reclamation. Do not throw it in the trash or pour it into the earth.
What your 3 year warranty means
Great care has gone into the manufacture of this product and it should therefore
provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of the rst
3 years after the date of purchase, we will remedy the problem as quickly as
possible once it has been brought to our attention. In the unlikely event of such an
occurrence, or if you require any information about the product please contact us
via our after sales support services, details of which can be found in this manual
and on the product itself. After Sales Support TEL: 1300 889 028
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
37
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
Troubleshooting
Troubleshooting
Problem
Possible Cause Solution
Engine does
not start.
Fuel tank (14) is empty.
Oil tank is empty.
Spark plug (24).
Blade hitting the grass to be cut.
Old fuel in tank or bowl.
Variable speed throttle control
(2) not turned on.
Check the fuel tank (14), and refuel if
required.
Check the level of the oil dipstick (17),
and if low or empty, add oil.
Clean or replace if dirty or worn.
Increase the cutting height of the mower
so the blades do not make contact with
the grass on start up.
FULLY drain the fuel from the fuel tank (14)
via the drain in the bowl of the carburettor.
Even if there is no fuel in the fuel tank (14),
drain all old fuel out of the bowl.
Refer page 21.
Check the variable speed throttle control
(2) is fully pressed downwards to the
engine.
Cutting / Engine
performance
decreases.
Cutting height.
Bar blade (26) is dull or blunt.
Hard catcher (7) is full .
Increase the cutting height using the
height adjustment lever (28).
Replace the bar blade (26) with new / sharp
blade.
NOTE: Always ensure the engine is turned
o before undertaking this task.
Empty hard catcher (7).
Hard catcher is
not lling up to opti-
mum level.
Cutting height too low.
Grass is wet.
Bar blade (26) is dull or blunt.
Increase the cutting height using the
8 height adjustment lever (28).
Allow the grass to dry before mowing.
Sharpen or replace bar blade (26).
Engine will not stop.
(DO NOT Panic)
Variable speed throttle control
(2) not turned off.
Fully turn the variable speed throttle
control (2) upwards to the upper handle
bar (1).Pump the priming bulb (22) 5 or 6
times quickly.
Remove spark plug cover.
Allow motor to continue to run until fuel
all used. Do NOT leave the mower
unattended.
For all other issues, please contact Customer Service on 1300 889 028
or email info.aldi@positecgroup.com
4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com
1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
(toll free)
38
info.aldi@positecgroup.com
1300 889 028
10/2019 10852
Specications
Specications
Engine: 161cc, Four Stroke
Engine Capacity: 161cc
Torque: 8.5Nm
Bore: 65 mm
Stroke: 48.5 mm
Speed: 1800-3000 RPM +/- 15%
Fuel Type: Unleaded petrol
Engine Model: DVO160
Oil Type: 4 Stroke Motor Oil SAE 10W/30
Fuel Tank Capacity: 1.3L/1300ml +/- 0.1L
Oil Tank Capacity: 0.35L/350ml +/- 0.05L
Width of cut: 46cm/460mm/(18”)
Blades: Bar Blade
Height adjustment: 7 Levels, 25mm (+/-5mm) – 75mm (+/- 7mm)
Spark Plug Type: LG F7RTC
Equivalent Replacement
Spark Plug: NGK BPR6ES
Catcher Capacity: 55 Litres
Weight (NW): 26 kg
Noise label rating: 96dB(A) (taken at 4.0 metres)
You must wear ear protection at all times.
Product Dimensions: 150cm x 53cm x 112/108.5cm
+/- tolerances (L x W x H)
This product complies with:
Safety Report: AS 2657:1985
EMC: EN ISO 14982:2009
AFTER SALES SUPPORT
(toll free)
4 Stroke Petrol Lawn Mower
e-mail: help@powertoolsupport.com1800 909 909
MODEL: №. DM46P-DO160 • 09/2018 • 60751
39
1300 889 028
info.aldi@positecgroup.com
10/2019 10852
NATIONAL SERVICE AGENT LISTING
If you are experiencing any issues with your 10852, 4 Stroke Petrol Lawn mower, please take it
to one of our qualified Service Agents listed below for repair (If there is no Service Agent nearby,
please check our more comprehensive list on our website). Make sure you take a
copy of your receipt as proof of purchase to cover the cost of any warranty work.
If you cannot take the product, please contact 1300 889 028 to arrange delivery.
For general product enquiries, please visit our website, https://help.tools/
for product specifications, instruction manuals, FAQ’s and Know How videos.
Alternately, you can call our Customer Support line on 1300 889 028 for general enquiries.
www.aldi.com.au 1300 889 028
Black
Code: 60751 Service
10/2019 ED1
Date: 17 12 15 Edition: 01 Op: MW
DIELINE
VIC
Croydon Mower Power 327 Maroondah Hwy Croydon North 3136 03 9723 1046
Stihl Shop Dandenong 37-39 Cheltenham Rd Dandenong 3175 03 9792 0068
Lawn Mower Land 23/61 Wattle Rd Maidstone 3012 03 9317 7717
Traralgon Mowers 2/6 Rocla Rd Traralgon 3844 03 51750260
Shepp City Garden
Equipment
42 Benalla Rd Shepparton 3630 03 5821 0045
NSW
Stihl Shop Coffs Harbour 32 Isles Drv Coffs Harbour 2450 02 6652 1499
Fairfield City Mowers & Chainsaws
9 Alan St Fairfield 2165 02 9724 4622
North Shore Mower Repairs Fitzsimmons Lane Gordon 2072 02 9498 1838
Wingham Country Mower Repairs
2 Belbourie St Wingham 2429 02 6553 0649
Moussa Mowers 1108 Canterbury Rd Roselands 2196 0421379905
SA
Power Mower 21 Glen Osmond Rd Eastwood 5063 08 8272 4988
Dad & Jerry's Mower Mart 533 Brighton Road South Brighton 5048 08 8377 3566
QLD
Cairns Mower City 35-37 Minnie St Cairns 4870 07 4051 4133
Mower World 174 Siganto Drive Helensvale 4212 07 5573 4388
Park Avenue Mower 52 Main St Nth Rockhampton 4701 07 4927 8566
Tingalpa Mower & Small 294 New Tingalpa 4173 07 3348 8690
Engines Cleveland Rd
WA
Mighty Sharp 16 Regent Drive Alexander Heights 6064 0429 934 281
Beechboro Mowers
& Small Engine Repairs
4/487 Beechboro Rd North
Beechboro 6063 08 9342 6909
Pool Wise Living
& Small Motors Mower City 269 Walter Road West Morley 6062 08 9276 1211
60751 Service ED1.indd 1 23/02/2018 12:54 PM
MODEL: DM46P-DO160 • 09/2018 • 60751
1800 909 909 (toll free)
e-mail: help@powertoolsupport.com
ALDI guarantees that our exclusive brand products are developed to
our stringent quality specications. If you are not entirely satised with this
product, please return it to your nearest ALDI store, within 60 days from
the date of purchase, for a full refund or replacement, or take advantage of
our after sales support by calling the supplier’s Customer Service Hotline.
Made in China
FERREX® is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 SARGENTS ROAD
MINCHINBURY NSW 2770
www.aldi.com.au
108521 0/2019
SLM463
10852
DM46P-DO160
10/2019
… 37 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Ferrex-DM46P-DO160

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferrex DM46P-DO160 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferrex DM46P-DO160 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info