383724
6
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
6
EN

Mounting
Open the collar (10) by turning it
counterclockwise.
Insert the saw blade (11) in the saw blade
holder (4) as far as possible. The teeth of the
saw blade (11) must point downward and
forward.
Close the collar (10) by turning it clockwise.
Removing
Open the collar (10) by turning it
counterclockwise.
Remove the saw blade (11) from the saw
blade holder (4).
Close the collar (10) by turning it clockwise.
USE

To switch on the machine, keep the lock-off
button (2) pressed and simultaneously press
the on/off switch (1).
To switch off the machine, release the on/off
switch (1).

The release button for the auxiliary grip can be
set to 4 positions.
2
Do not set the auxiliary grip during use.
Slide the release button (3) in the direction of
the main grip (7).
Turn the auxiliary grip (8) to the required
position.
Release the release button (3).

The saw shoe can be adjusted in order to rest
properly on the workpiece.
2
Do not adjust the saw shoe during use.
Release the adjustment handle (6) by lowering
it to the open position.
Move the saw shoe (5) to the required
position.
Lock the adjustment handle (6) by raising it to
the closed position.
Plunge cutting
Only use ‘plunge cutting‘ on soft materials.
Only use ‘plunge cutting‘ with short saw blades.
Switch on the machine.
Wait until the machine has reached full speed.
Place the saw shoe on the workpiece.
Make sure that the bottom edge of the saw
shoe rests on the workpiece.
Slowly move the saw blade into the workpiece
at an angle. Move the machine to the vertical
position and continue to move the saw blade
along the pre-drawn line.
Switch off the machine when the work has
been completed.
Remove the machine from the workpiece.
Flush cutting
Only use ‘ush cutting‘ with elastic, bi-metal
saw blades to use the machine on protruding
objects close to the wall.
Switch on the machine.
Wait until the machine has reached full speed.
Place the saw blade directly on the wall.
Slightly bend the saw blade to make sure that
the saw shoe rests against the wall.
Slowly move the saw blade through the
workpiece. Apply constant lateral pressure
against the wall.
Switch off the machine when the work has
been completed.
Remove the machine from the workpiece.
Hints for optimum use
Clamp the workpiece. Use a clamping device
for small workpieces.
Draw a line to dene the direction in which to
guide the saw blade.
Hold the machine with both hands.
Set the auxiliary grip.
Adjust the saw shoe.
Switch on the machine.
Wait until the machine has reached full speed.
Place the saw shoe on the workpiece.
Slowly move the machine along the pre-drawn
line, rmly pressing the saw shoe against the
workpiece.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm rsm1015 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm rsm1015 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 4,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info