46 Ferm
CORDLESS DRILL
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
SAFETY AND OPERATING INSTRUCTIONS
Read through these operating instructions care-
fully before using the appliance. Become familiar
with the functions and method of operation. To ensure proper
operation, always maintain the appliance according to the
instructions. The operating instructions and associated
documents should always be kept close to the appliance.
CONTENTS:
1. Machine data
2. Safety instructions
3. Mounting accessories
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL DATA
PRODUCT INFORMATION
Fig. A
1. On/off switch
2. Speed selector switch
3. Torque setting ring
4. Chuck
5. Battery
6. Direction switch
CONTENTS OF CARRYING CASE
The carrying case contains:
1 Cordless drill
2 FDC-1440B batteries
1 FDC-1440L battery charger
2 Double-sided bits
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and accessories for
damage caused during transport.
2. SAFETY INSTRUCTIONS
The following pictograms appear throughout these
operating instructions:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation
You don’t need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Indoor use only
Do not use in rain.
Always recycle batteries
Ni-Cad batteries can be recycled. Drop them off at
a disposal center forchemical wastes, so that they
can be recycled or disposed of in an eco-friendly
manner.
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
When using power tools, you must observe the
follwing basic safety precautions in order to ensure
protection from electric shocks, injury and fire.
Read and follow all the instructions before using this
power tool.
Look after the notes on safety.
• Remove the battery block. When the power tool is
not being used, prior to maintenance and when
changing tools such as the clamping chuck, and drill.
• The tool is suitable for use as a screwdriver and drill.
Any other application is specifically excluded.
IMPORTANT SAFETY NOTES ON CHARGER
AND BATTERY BLOCK
If you come into contact with acid from the battery
block, rinse it off with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor immediately!
1. Read and note the operating instructions and safety
notes for the charger and battery block before use!
2. NB! Only use the charger and battery block that
were supplied by the manufacturer - otherwise you
will risk an accident.
Voltage | 14.4 V
—
---
Charger voltage | 230 V
Charger frequency | 50 Hz
Battery output | 1.3 Ah
Charging time | 3 - 5 hours
Drill speeds | 2
Max. torque (low speed) | 20 Nm
No-load speed | 0-400/0-1150 rpm
Chuck capacity | 0.8 - 10 mm
Weight (incl. battery) | 1.68 kg
Lpa (sound pressure) | < 75 dB(A)
Vibration | < 2.5 m/s
2
Ferm 3
SPARE PARTS LIST FDC-1440K2
REF NR DESCRIPTION FERM NR
003 SWITCH 406654
004 BATTERY CDA1006
010 KEYLESS CHUCK 0.8 - 10 MM 406470
011 BOLT LEFT FOR CHUCK 406403
034 MOTOR 406653
038 LEFT/RIGHT BUTTON 406656
- BATTERY HOLDER 406178
- ADAPTOR 406179
