Ferm 3
TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power input 1650 W
No-load speed 8000/min
Disc diameter 180 mm
Spindle dimension M14
Weight 3.75 kg
L
pa
(sound pressure) 94.6 dB(A)
L
wa
(acoustic power) 107.6 dB(A)
Vibration value 0.8 m/s
2
Electrical safety
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm
2
. When using a cable reel always unwind the reel
completely.
PACKAGE CONTENTS
The package contains:
1 angle grinder
1 side handle
1 spanner
Set carbon brushes
instruction manual
safety instructions
guarantee card
Check the machine, loose parts and accessories for trans-
port damage.
PRODUCT INFORMATION
Fig. A:
1. on/off switch
2. screw-on lid carbon brush (both sides)
3. spindle lock
4. grinding disc
5. side handle
6. lock-off button
