390340
8
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
8
EN
Remove the ange (11).
Remove the guard (5) by loosening the Allen
screw (14) and the nut (15) with the Allen key
(16).
Mount the ange (13).
If necessary, mount the grinding disc (12).
Keep the spindle lock button (3) pressed and
mount the ange (10) using the ange key (9).
Mounting and removing the grinding disc

2
Do not use the machine without the
guard.
Mounting
Place the machine on a table with the guard (5)
facing upwards.
Keep the spindle lock button (3) pressed and
remove the ange (10) using the ange key (11).
Mount the grinding disc (12).
Keep the spindle lock button (3) pressed and
mount the ange (10) using the ange key (11).
Removing
Place the machine on a table with the guard (5)
facing upwards.
Keep the spindle lock button (3) pressed and
remove the ange (10) using the ange key (11).
Remove the grinding disc (12).
Keep the spindle lock button (3) pressed and
mount the ange (10) using the ange key (11).

Mounting
Tighten the auxiliary grip (7) into one of the
mounting holes (17).
Removing
Loosen the auxiliary grip (7) from the mounting
hole (17).
USE

To switch on the machine in continuous mode,
keep the lock-off button (2) pressed and press
the on/off switch (1).
To switch off the machine, press the on/off
switch (1) again.

The main grip can be set to 3 positions.
2
Do not set the main grip during use.
Slide the release button (8) in the direction of
the main grip (6).
Turn the main grip (6) to the required position
until it locks into place.
Release the release button (8).
Hints for optimum use
Clamp the workpiece. Use a clamping device
for small workpieces.
Draw a line to dene the direction in which to
guide the grinding disc.
Hold the machine with both hands.
Switch on the machine.
Wait until the machine has reached full speed.
Place the grinding disc on the workpiece.
Slowly move the machine along the pre-drawn
line, rmly pressing the grinding disc against
the workpiece.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
Regularly clean the housing with a soft cloth.
Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.

Worn or damaged grinding discs must be
replaced immediately.
2
Only use sharp and undamaged grinding
discs.
To remove the old grinding disc (12), proceed
as described in the section
″Mounting and removing the grinding disc″.
To mount the new grinding disc (12), proceed
as described in the section
″Mounting and removing the grinding disc″.
Checking and replacing the carbon brushes

The carbon brushes must be checked regularly.
If the carbon brushes are worn, the machine will
start to run unevenly.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm agm1029 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm agm1029 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Deens, Noors als bijlage per email.

De handleiding is 6,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info