762273
7
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
7
EN
4. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Troubleshooting
1. Motor hums but does not spray or irregular
spraying
Worn swirl head.
- Replace swirl head.
Pick up pipe not in the right position.
- Re-adjust pick up pipe.
Blocked pick up pipe.
- Clean with thinner.
Blocked nozzle.
- Clean nozzle.
Blocked filter.
- Clean with thinner.
Control knob needs adjustment.
- Adjust.
2. Atomization is not good
Volume adjustment is not correct.
- Adjust.
Paint too thick.
- Check viscosity of the paint.
3. Over painting
Spray gun not clean, or not lubricated,
resulting in piston being stuck in cylinder.
- Disassemble spray gun and clean with thinner.
Too much paint.
- Adjust the volume clockwise to reduce
spraying. Two thin coats are better then one
thick coat.
Viscosity too low.
- Check viscosity.
4. Motor louder than normal
Spray gun not clean, or not lubricated,
resulting in piston being stuck in cylinder.
- Disassemble spray gun and clean with thinner.
5. No spray, no sound
No electricity.
- Check power supply.
6. Operating sound not right
Poor output adjustment.
- Re-adjust.
Not enough paint in the container resulting in
air being sucked in.
- Refill with paint.
Not diluting properly or not passing pick up
pipe completely.
- Check pick up pipe and viscosity level.
7. “Orange Skin” excessive fogging
Incorrect solvent is used.
- Use correct solvent.
Spray gun too far from the surface.
- Hold spray gun closer to the object.
Paint too thick.
- Thin the paint.
Cleaning and maintenance
Fig. G
Always remember to disconnect from the
mains supply before cleaning the spray
gun or paint container.
It is essential that the spray gun is cleaned
thoroughly after every use. Failure to clean it will
almost certainly result in blockages and it may
not operate when you next come to use it! The
guarantee does not cover cleaning a sprayer that
has not been properly cleaned by the user. The
following action must be taken after every use:
Empty any remaining material from the
container.
Clean the container thoroughly with the thinner
thatwas used.
Pour some thinner into the container and spray
through the spray gun until only clean thinner
is coming out of the nozzle.
Thoroughly clean the paint pick up pipe and
filter with thinner.
Clean the basket and nozzle and remove any
other debris or paint that remains.
Turn the spray gun upside down and apply a
few drops of light oil to the two apertures (F).
This will lubricate the piston and cylinder.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm SGM1012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm SGM1012 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info