58 Ferm
MITRE SAW MACHINE
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
For your own safety, carefully read these
instructions for use before using the machine.
CONTENTS:
1. Machine information
2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. MACHINE INFORMATION
INTRODUCTION
The mitre saw machine is designed for sawing wood and
woody pieces of work.
TECHNICAL SPECIFICATION
LIST OF PARTS
1. Handgrip with switch
2. Unlock button
3. Motor housing (carbon brush cover)
4. Blade protective cover
5. Cutting head unlock button
6. Extension pieces (left and right)
7. Clamp
8. Clamp holes
9. Knob for setting the sawing angle
10. Saw blade lock
11. Rotary knob for mitre sawing
12. Dust bag
13. Stop
14. Screw
15. Saw blade bolt
16. Flange
17. Hood
18. Scale for bevelling
PACKAGE CONTENTS
1 Mitre saw
1 Dust bag
1 Clamp
2 Extension pieces + 2 clamps
4 Rubbers
1 Key for changing the saw blade
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
CE Conforms to the applicable European safety
standards
Class II equipment – doubly insulated – the plug
does not have to be earthed
Danger of bodily injury or material damage.
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
BEFORE EACH USE OF THE SAW
Check the machine. If any part of the machine is missing,
bent or in any other way unusable, or when an electrical
defect occurs, turn the machine off and take the plug out
of the socket. Replace all missing, damaged or defective
parts before using the machine again.
To fix the saw blade in the slot and to prevent the piece
of work from moving, follow the instructions below.
Voltage | 230 V ~
Capacity | 2000 W
Machine class | II (double insulated)
Revolutions, not under load | 4800 rpm
Saw blade measurement | 305x25.4x3.0 mm
Angle for mitring | 45º (left and right)
Angle for bevelling | 45º (only left)
Mitre sawing capacity: |
Mitre 0º, Bevel 0º | 79 x 195 mm
Mitre 45º, Bevel 45º | 42 x 135 mm
Mitre 45º, Bevel 0º | 70 x 135 mm
Mitre 0º, Bevel 45º | 48 x 135 mm
Weight | 23 kg
Lpa (sound pressure) | 95 dB(A)
Lwa (acoustic capacity | 108 dB(A)
Vibration level | 9.88 m/s
2
Ferm 3
SPARE PARTS LIST
FERM NR DESCRIPTION REF NR
500266 LOCKING HANDLE 1+2
500267 LOCKING KNOB 9 TILL 12
500268 BLADE GUARD LOCK 29 TILL 31, 36+37
500269 FLANGE (SET) 47, 49 TILL 51
MSA1019 SAW BLADE, 305MM, CARBIDE TIPS 48
500270 SAW BLADE GUARD COMPLETE 52 TILL 59
500271 SLIDING BAR BLADE GUARD 60 TILL 62
500272 SAW GUIDE COMPLETE 33(2X), 63(2X), 64(2X), 65
500273 INLAY PLATE 70
500274 LOCKING ROD WORKTABLE 74
500275 LOCKING KNOB WORKTABLE 75
500276 WORKPIECE CLAMP 20, 85, 91 TILL 98
500277 CARBON BRUSH (SET) 101
500278 CAP CARBON BRUSH 102
500279 SWITCH 103
