Ferm 53
LOG SPLITTER (FLS-37 + FLS-52)
Always read the instruction for electrical products
carefully before use. It will help you understand your
product more easily and avoid unnecessary risks.
Please note that figure references in the text refer to the
figures placed at the front of the manual.
Keep this instruction manual ina safe place for future use.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Technical specification
* The diameter of the log is indicative - a small log can be
difficult to split when it has knobs or a particularly tough
fibre. On the other hand, it may not be difficult to split a
log with regular fibres even if its diameter exceeds the
maximum value indicated above.
Contents of packing
• Log splitter
• Support leg
• Safety instructions
• Instruction manual
• Warranty card
Introduction
With the FLS-37 and FLS-52 you can split wooden logs.
The log splitter works with a hydraulic system driven by
an electromotor. The machine has a two-hand control
to avoid accidents.
Features
Fig.1 + 2
1. Log pusher
2. Work table
3. Wedge
4. Lift handle
5. Support leg
6. Log retaining plates
7. Switch
8. Motor
9. Electric control box
10. Wheels
11. Hydraulic control lever
12. Control lever guard
13. Bleed screw
14. Oil drain bolt / dipstick
15. Maximum pressure limiting screw
16. Circuit protector
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual
Indicates electrical shock hazard
Read the instructions carefully
Defect and/or discarded electrical tools have to be
brought to the intended institution for separate
collection
Wear eye protection
Weear protective gloves
Model | FLS-37
Art. no. | LSM1001
Voltage | AC 230 V
Frequency | 50 Hz
Input power | 1500 W
IP Class | IP54
Splitting force | 4 t
Log capacity (diameter)* | 5 - 25 cm
Log capacity (length) | 37 cm
Hydraulic oil capacity | 2.2 L
Weight | 43 kg
Model | FLS-52
Art. no. | LSM1002
Voltage | AC 230 V
Frequency | 50 Hz
Input power | 1500 W
IP Class | IP54
Splitting force | 4 t
Log capacity (diameter)* | 5 - 25 cm
Log capacity (length) | 52 cm
Hydraulic oil capacity | 2.8 L
Weight | 48 kg
4 Ferm
