Ferm 95
10. Πρυλακτική συσκευή της λεπίδας
11. Κπτική λεπίδα (+πρυλακτική συσκευή)
12. Συλλγή µπαταριών
13. Φις της συλλγής µπαταριών
14. ώνη των µπαταριών
15. Μετασηµατιστής ρτίσεως
16. Φις τυ ρτιστή
Περιεµενα της συσκευασιας
1 Συσσωρευτικ κηπευτικ σύστηµα
1 Συλλγή µπαταριών
1 Φρτιστής µπαταριών
1 δηγιες ρησεως
1 δηγίες ασαλείας
1 Κάρτα εγγύησης
1 Κπτική µηανή των κλαδιών (Κλαδωκπτης)
1 Θεριστική µηανή για ρτα (ρτκπτης)
Ελέγτε, εάν η µηανή, τα ελεύθερα εαρτήµατα και τα αεσυάρ δεν έπαθαν
λάες κατά τη µεταρά.
2. ∆ΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ
Επεήηση συµλων
Σ’ αυτ τ εγειρίδι και/ή στ µηάνηµα ρησιµπιύνται τα ακλυθα σύµλα:
∆ιαάστε τις δηγίες.
Σε εναρµνιση µε υσιώδη ισύντα πρτυπα ασαλείας των Ευρωπαϊκών
8δηγιών.
Μηανή κλάσης ΙI :– ∆ιπλή µνωση - ∆εν απαιτείται γειωµένς
ρευµατλήπτης.
Υπδηλώνει κίνδυν τραυµατισµύ,θανάτυ ή ηµιάς τυ εργαλείυ,σε
περίπτωση πυ δεν ακλυθήσετε τις δηγίες πυ αναέρνται σε αυτ τ
εγειρίδι.
Υπδηλώνει κίνδυν ηλεκτρπλη$ίας.
Να ανακυκλώνετε πάνττε τις µπαταρίες.
GB
D
NL
F
E
P
I
14 Ferm
6. MAINTENANCE
Make sure the battery is disconnected and wear protective gloves before handling
the blade.
To ensure long and reliable service, carry out the following maintenance regularly:
• Check for obvious defects such as loose, dislodged or damaged blades, loose fixings and
worn or damaged components.
• Check that covers and guards are undamaged and correctly fitted.
Blade maintenance:
• Wear gloves when handling or cleaning the cutting blade.
• Always clean the cutting blade after operation and coat it with a lubricating spray. A Lack
of lubrication to the blade can severely effect the products run time.
• During longer cutting periods 15 minutes or greater it is recommended to lubricate the
blade, this will improve cutting performance and extend the batteries run time.
• Careful selection of the spray should be taken as some lubricants may reduce run times
by up to 60%.
• Before use: Visually check the condition of the cutting edges of the cutting blade. Check
the tightness of blade bolts
• When not in use ensure that the blade is covered with the blade guard provided and that it
has been lubricated. Failure to do so may cause the blade to corrode and will severely
reduce cutting performance and battery run times.
Cleaning and storage
• Remove or disconnect the battery from the tool during storage. Take care not to short the
battery contact terminals with metal objects.
• Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use
water or solvents. Remove all debris especially from the ventilation slots on the motor
housing.
• Always lubricate the cutting blade with protective spray before storage.
• Store the hedge cutter in a secure, dry place out of reach of children.
• Do not place other objects on top of the machine.
• Storage outside in a damp environment such as a garden shed may cause certain items
such as the blades to corrode.
GB
D
NL
F
E
P
I
RUS
GR
RUS
GR
