762287
6
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
6
EN
Description
The numbers in the text refer to the diagrams on
pages 2-3
Fig. A


3. Speed adjustment wheel
4. Lock-on button
5. Function selection switch
6. Side handle
7. Locking sleeve
8. Depth stop ruler
3. OPERATING
Hammer drills require very little operator
pressure. Excessive pressure on the tool
can lead to unnecessary overheating of
the motor, and burning of the driven tool.
It also may happen the drill bit deforms
and cannot be removed from the
machine again.
Side handle
Fig. A
The side handle (6) can be rotated 360° around
the drill head, enabling safe and comfortable
operation for both left and right-handed users.
Loosen the handgrip by turning it
anticlockwise.
Rotate the handgrip to the desired position.
Retighten the handgrip in the new position by
turning it clockwise.
Exchanging and removing drill bits
Fig. A - B
Before exchanging bits, first remove the
power plug from the wall socket.
Inspect bits regularly during use. Blunt
bits should be re-sharpened or replaced.
Lightly oil the bit shaft before inserting it into
the chuck.
Slide the locking sleeve (7) to the rear and
insert the bit into the chuck opening. Ensure
that the keyway in the bit is seated properly
in the chuck by carefully turning the bit until it
clicks into place. After that release the locking
sleeve.
To remove the bit, slide and hold the locking
sleeve to the rear.
Setting depth stop
Fig. A
Loosen the handgrip by turning it
anticlockwise.
Insert the depth stop ruler (8) through the hole
in the side handle ring.
Slide the ruler to the desired depth.
Retighten the hand grip firmly by turning it
clockwise
The On/Off switch
Fig. A
 

(2) the machine will turn off.
The rotation-speed can be continuously

deeper or less deep.
Lock-on button
Fig. A
 
Off switch (2) and then pressing the lock-on
button (4).
Release the switch-lock by shortly pressing

Adjusting of the maximum rotation speed
Fig. A
 
switch (2).
 
lock-on button (4).
Adjust the speed by turning the speed
adjustment wheel (3) to the desired maximum
rotation speed.
Switching the direction of rotation
Fig. A.
Direction of rotation counter-clockwise: shift
 ”.
 
 ”.
This function is only available when the machine

6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm HDM1027S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm HDM1027S in de taal/talen: Alle talen als bijlage per email.

De handleiding is 17,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info