764189
5
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
5
EN
d) During charging, batteries must be placed
in the well ventilated area!
Before using the tacker
Always wear eye protection when using the
tool.
Maintain the tool with care.
Check for misalignment or binding of moving
parts, breakage of parts, and any other
condition that may affect the tools operation. If
damaged, have the tool serviced before using.
Check if the slide cartridge has been fastened
properly.
Do not use the tool in a humid environment.
Do not use the tool on materials containing
asbestos.
Using the tool
Do not use the tool if the switch does not turn
it “ON” or “OFF”.
Replacing cables or plugs
Immediately throw away old cables or plugs
when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in
the wall outlet.
Remove all staples from the magazine
after each use
3. USE
The machine must be charged before
first use.
Charging the machine (with the charger
adaptor)
Fig. B
The machine can be charged by the charger
adapter or by your USB mobile phone charger.
If needed, connect the USB cable to the
charger adaptor by pushing its USB plug in the
charger adaptor’s USB socket.
Plug the small cable plug into the machine’s
charging socket.
Plug the charger into an electrical outlet and
wait for a while. The LED indicator on the
machine will lighten up and show the charging
status.
Charging the machine (on a USB socket)
Fig. C
If needed, remove the USB cable from the
charger adaptor by pulling it out of the USB
socket.
Plug the small cable plug into the machine’s
charging socket.
Plug the cable USB plug into USB device (for
example on your mobile phone charger).
Make sure the USB device is powered or
switched on.
Check charging status by checking if the
charging indicator light on the machine is
burning.
Charging indication light
Fig.A
The machine has a charging indication light which
indicates the status of the charging process:
LED color Status
Red Battery charging in progress
Green Battery charging finished, battery fully charged
After the battery is fully charged remove the
charger plug from the outlet and remove the
cable from the machine.
Lithium-Ion cells can be stored for a long
period without losing much of their
charge. When the machine is not being
used over a longer period of time it is
best to store the battery in charged
condition.
Application
Fig. 2
For this tool, use one of the following types
staples:
U Type 530: 6-12 mm
Loading the tacker
Before opening the tool, make sure the
tool is switched off.
To load the tacker
Fig. 3 - 4
Replacing staples
Press the slide unlock (2) to unlock the slide.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm ETM1005 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm ETM1005 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info