763624
2
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Ferm 43
TRIANGULAR SANDER
Read this operators guide carefully, before
using the machine. Ensure that you know how
the machine works, and how it should be opera-
ted. Maintain the machine in accordance with
the instructions, and make certain that the
machine functions correctly. Keep this operator’s
guide and other enclosed documentation with
the machine.
Contents:
1. Technical specifications
2. Safety instructions
3. Use
4. Maintenance
1. TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power consumption 260 W
No load speed 6000-9000/min
Weight 1.2 kg
Lpa (Sound pressure level) 71.4 dB(A)
Vibration value 5.8 m/s2
CONTENTS OF THE PACKAGING
The packaging contains:
1 Sander
12 pieces of sandpaper
1 case
1 Instructions
1 safety section
1 warranty card
Check the machine and accessories for transport
damage.
2. SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Wear a dust mask
Always use ear protection
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropri-
ate recycling locations.
Immediately unplug the plug from the mains
electricity in the case that the cord gets dama-
ged and during maintenance
Electrical safety
Always check that the mains voltage corres-
ponds to the voltage on the rating plate.
The machine is double insulated in accordance
with EN50144; therefore no earth wire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm2. When using a cable reel always unwind the
reel completely.
SPECIAL SAFETY INSTRUCTIONS
BEFORE USING THE MACHINE:
1. Check the following points.
- do the voltage of the appliance correspond with
the mains voltage, appliances for a mains voltage
of 230 V can also be connected at a mains voltage
of 220 V;
- are the mains lead and the mains plug in a good
condition: solid, without any loose ends or
damage;
2. Avoid using long extension cables.
3. Check the condition of the sandpaper. Is it not worn or
are there any cracks. Replace bad sandpaper.
2Ferm
SPARE PART LIST FTS-260K
REF.NO. DESCRIPTION FERM NO.
2 SPINDLE GEAR 408200
16 SANDING PAD 408201
18 FIELD COIL 408202
19 CARBON BRUSH (SET) 408203
23 ARMATURE 408204
25 ARMATURE GEAR 408205
38 SWITCH 408206
EXPLODED VIEW
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm DSM1003 - FTS-260K bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm DSM1003 - FTS-260K in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info