Ferm 69
GB
04 Ferm
CIRCULAR SAW
The pictures mentioned in the text are
corresponding with the pictures at page 2 - 3.
For your own safety and for the safety
of others, please read these
instructions carefully before using this
appliance. It will help you understand
your product more easily and avoid
unnecessary risks. Keep this instruction
manual in a safe place for future use.
Contents
1. Machine data
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
Technical specifications
Product information
Fig. A
1. Handgrip
1A.Extra handgrip
2. Type plate
3. On/off switch
4. Handle to set sawing depth
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagonal bolt
9. Soleplate
10.Flange
11.Saw blade
12.Rip fence
13.Rip fence clamping knob
14.Handle to set sawing angle
- Shaft lock (Fig. C3)
Unpacking
The circular handsaw is shipped with:
1 Rip fence
1 TCT Saw blade ∅210 mm, T40
1 TCT Saw blade ∅210 mm, T60
1 Box spanner
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these
instructions for use:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Keep bystanders away
Specific safety instructions
Danger
a) Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are
holding the saw, they cannot be cut by the
blade.
b) Do not reach underneath the workpiece. The
guard cannot protect you from the blade
below the workpiece.
c) Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
d) Never hold piece being cut in your hands or
across your leg. Secure the workpiece to a
stable platform. It is important to support the
work properly to minimize body exposure,
blade binding, or loss of control.
e) Hold power tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or its
own cord.
Voltage 230 V~
Frequency 50 Hz
Power input 1800 W
No load speed 5000/min
Saw blade dimensions 210x30x2.4 mm
Number of teeths T40
Weight 6.4kg
Lpa (sound pressure level) 97.2 dB(A)
Lwa (sound power level) 110.2 dB(A)
aw(vibration value) 1.138 m/s2
GB
