Handleiding Ferm COM1003 - AM-355 (pagina 4 van 34) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins)

634086

Verklein

Vergroot

Pagina terug

1/34

Pagina verder

4. ì·Â‰ËÚ¸Òﬂ, ˜ÚÓ ÒÓÒÚÓﬂÌËÂ ÙÎ‡ÌˆÂ‚ (2) ‰ËÒÍ‡

ıÓÓ¯ÂÂ. ì‰‡ÎËÚ¸ Ò ÌËı „ﬂÁ¸, ÂÒÎË ÂÒÚ¸, Ú‡Í Í‡Í

ÓÌ‡ ÏÓÊÂÚ ÒÚ‡Ú¸ ÔË˜ËÌÓÈ ÌÂÓ‚ÌÓÈ ÂÁÍË Ë

ÔÓÎÓÏÍË ‰ËÒÍ‡.

5. ìÒÚ‡ÌÓ‚ËÚ¸ Ì‡ ÏÂÒÚÓ ‚ÌÛÚÂÌÌËÈ Ë ‚ÌÂ¯ÌËÈ

ÙÎ‡Ìˆ˚ ‰ËÒÍ‡, ÍÓÎ¸ˆÂ‚Û˛ ÔÓÍÎ‡‰ÍÛ, ÔÎÓÒÍÛ˛

¯‡È·Û, Á‡ÔÓÌÛ˛ ¯‡È·Û Ë ¯ÂÒÚË„‡ÌÌÛ˛ „‡ÈÍÛ,

Í‡Í ÔÓÍ‡Á‡ÌÓ Ì‡ ËÒÛÌÍÂ ÒÔ‡‚‡. ç‡Ê‡Ú¸ ‚ÌËÁ

Á‡ÔÓ ¯ÔËÌ‰ÂÎﬂ Ë ‚ ÚÓ ÊÂ ‚ÂÏﬂ ÔËÎ‡„‡ÂÏ˚Ï

¯ÂÒÚË„‡ÌÌ˚Ï ÍÎ˛˜ÓÏ Á‡ÚﬂÌÛÚ¸ „‡ÈÍÛ ÔÓ ˜‡ÒÓ‚ÓÈ

ÒÚÂÎÍÂ.

6. ÇÂÌÛÚ¸ ‚ ËÒıÓ‰ÌÓÂ ÔÓÎÓÊÂÌËÂ ÔÓ‰‚ËÊÌÛ˛ ˜‡ÒÚ¸

Á‡˘ËÚÌÓ„Ó ÍÓÊÛı‡.

7. èÂÂ‰ ÚÂÏ, Í‡Í Ì‡˜‡Ú¸ ÂÁ‡Ú¸, Ì‡‰Ó ‰Îﬂ ÔÓ‚ÂÍË

ÔÓ„Ì‡Ú¸ Ï‡¯ËÌÛ ‚ıÓÎÓÒÚÛ˛, Ú.Â. ÓÚÒÚÛÔËÚ¸ Ì‡Á‡‰,

Á‡ÔÛÒÚËÚ¸ Ï‡¯ËÌÛ, ‰‡Ú¸ ÂÈ ÔÓ‡·ÓÚ‡Ú¸ Ë

Û·Â‰ËÚ¸Òﬂ, ˜ÚÓ ÒÓÒÚÓﬂÌËÂ ‰ËÒÍ‡ ÌÓÏ‡Î¸ÌÓÂ.

èÓÒÎÂ Á‡ÏÂÌ˚ ÂÊÛ˘Â„Ó ‰ËÒÍ‡ ıÓÎÓÒÚ‡ﬂ ÔÓ„ÓÌÍ‡

‰ÓÎÊÌ‡ ‰ÂÎ‡Ú¸Òﬂ ‚ ÚÂ˜ÂÌËÂ ÚÂı ÏËÌÛÚ. á‡ÚÂÏ,

ÔÂÂ‰ Í‡Ê‰˚Ï ‚˚ÔÓÎÌÂÌËÂÏ Ó·˚˜ÌÓÈ ‡·ÓÚ˚

ÔËÎÛ ÒÎÂ‰ÛÂÚ ÔÓ„ÓÌﬂÚ¸ ‚ıÓÎÓÒÚÛ˛ Ó‰ÌÛ ÏËÌÛÚÛ.

êÂ„ÛÎËÓ‚Í‡ „ÎÛ·ËÌ˚ ÂÁ‡.

å‡¯ËÌ‡ ËÏÂÂÚ ÔÓ‰‚ËÊÌÛ˛ ÔÎ‡ÒÚËÌÛ ‰Îﬂ

‚ÓÁÏÓÊÌÓÒÚË Â„ÛÎËÓ‚ÍË „ÎÛ·ËÌ˚ ÂÁ‡. ÖÒÎË ‰ËÒÍ ‚

ÔÓˆÂÒÒÂ ÂÁÍË ÌÂ Í‡Ò‡ÂÚÒﬂ ÔÓ‚ÂıÌÓÒÚË ÔÓ‰

‡·Ó˜ËÏ ÒÚÓÎÓÏ, ÚÓ ‚ Ú‡ÍÓÏ ÒÎÛ˜‡Â „ÎÛ·ËÌÛ ÔÓÔËÎ‡

Ì‡‰Ó Û‚ÂÎË˜ËÚ¸, Ú‡Í Í‡Í ‰Ë‡ÏÂÚ ‰ËÒÍ‡ ÛÏÂÌ¸¯ËÎÒﬂ Á‡

Ò˜ÂÚ ËÁÌÓÒ‡.

1. ÑÎﬂ ËÁÏÂÌÂÌËﬂ „ÎÛ·ËÌ˚ ÔÓÔËÎ‡ Ì‡‰Ó ÓÚ‚ËÌÚËÚ¸

(ÔÓÚË‚ ˜‡ÒÓ‚ÓÈ ÒÚÂÎÍË) „‡ÈÍÛ-·‡‡¯ÂÍ Ë ÒÌﬂÚ¸

Âﬁ.

2. ä‡Í ÔÓÍ‡Á‡ÌÓ Ì‡ ËÎÎ˛ÒÚ‡ˆËË ÒÔ‡‚‡, ‚˚ÒÚ‡‚ËÚ¸

Â„ÛÎËÓ‚Ó˜ÌÛ˛ ÔÎ‡ÒÚËÌÛ Ì‡ ÌÛÊÌÛ˛ ‚ÂÎË˜ËÌÛ.

3. ìÒÚ‡ÌÓ‚ËÚ¸ „‡ÈÍÛ Ì‡ ÏÂÒÚÓ Ë Á‡‚ÂÌÛÚ¸ Âﬁ ÔÓ

˜‡ÒÓ‚ÓÈ ÒÚÂÎÍÂ.

îËÍÒËÓ‚‡ÌËÂ Á‡„ÓÚÓ‚ÍË Ë Â„ÛÎËÓ‚Í‡ Û„Î‡

ÂÁ‡.

ÑÎﬂ ·ÂÁÓÔ‡ÒÌÓÈ ÙËÍÒ‡ˆËË Á‡„ÓÚÓ‚ÍË Ì‡ ‡·Ó˜ÂÏ

ÒÚÓÎÂ Ï‡¯ËÌ˚ ËÒÔÓÎ¸ÁÛÈÚÂ Á‡ÊËÏÌÓÈ ·ÎÓÍ Ë ÛÔÓ

(Ó„‡ÌË˜ËÚÂÎ¸). á‡ÊËÏÌÓÈ ·ÎÓÍ ÏÓÊÌÓ ÔÂÂÏÂ˘‡Ú¸

‚ÔÂÂ‰-Ì‡Á‡‰, Ë Û„ÓÎ ÂÁ‡ ÏÓÊÂÚ Ì‡ÒÚ‡Ë‚‡Ú¸Òﬂ ÔÓ

ÊÂÎ‡ÌË˛. ìÔÓ ÚÓÊÂ ÏÓÊÌÓ ÔÂÂ‰‚Ë„‡Ú¸ ‚ÔÂÂ‰-

Ì‡Á‡‰, Ë ÚÓ„‰‡ Û„ÓÎ ÂÁ‡ ÏÓÊÌÓ Ì‡ÒÚ‡Ë‚‡Ú¸ ÒÎÂ‚‡ ‚

‰Ë‡Ô‡ÁÓÌÂ ÓÚ 0° ‰Ó 45°.

1. ÑÎﬂ Â„ÛÎËÓ‚ÍË ÛÔÓ‡ ËÒÔÓÎ¸ÁÛÈÚÂ ÔËÎ‡„‡ÂÏ˚È

ÍÎ˛˜, ÍÓÚÓ˚Ï ÓÚ‚Ó‡˜Ë‚‡˛ÚÒﬂ (ÔÓÚË‚ ˜‡ÒÓ‚ÓÈ)

‰‚‡ ÙËÍÒËÛ˛˘Ëı ‚ËÌÚ‡ ÛÔÓ‡. á‡ÚÂÏ ÛÔÓ

‚˚ÒÚ‡‚ÎﬂÂÚÒﬂ ‚ ÌÛÊÌÓÂ ÔÓÎÓÊÂÌËÂ Ë Ì‡

ÚÂ·ÛÂÏ˚È Û„ÓÎ.

2. ÑÎﬂ Â„ÛÎËÓ‚ÍË Á‡ÊËÏÌÓ„Ó ·ÎÓÍ‡ ÓÚÚﬂÌËÚÂ Ì‡Á‡‰

ÙËÍÒËÛ˛˘ËÈ ˚˜‡„, ˜ÚÓ·˚ ‡Á·ÎÓÍËÓ‚‡Ú¸

˚˜‡„ ·˚ÒÚÓÈ ÓÒÚ‡ÌÓ‚ÍË. èÓ‚ÓÓÚÓÏ

ÙËÍÒËÛ˛˘Â„Ó ˚˜‡„‡ ÔÓÚË‚ ˜‡ÒÓ‚ÓÈ ÒÚÂÎÍË

Á‡ÊËÏÌÓÈ ·ÎÓÍ ÓÚÓ‰‚Ë„‡ÂÚÒﬂ Ì‡Á‡‰, ‡ ÔÓ‚ÓÓÚÓÏ

ÔÓ ˜‡ÒÓ‚ÓÈ - ÔË‰‚Ë„‡ÂÚÒﬂ ‚ÔÂÂ‰.

Ç˚ÒÚ‡‚¸ÚÂ ÛÔÓ ‚ ÌÛÊÌÓÂ ÔÓÎÓÊÂÌËÂ Ë Ì‡

ÚÂ·ÛÂÏ˚È Û„ÓÎ.

èÂÂ‚Â‰ËÚÂ ‚ÔÂÂ‰ ˚˜‡„ ·˚ÒÚÓÈ ÓÒÚ‡ÌÓ‚ÍË, Ú‡Í

˜ÚÓ·˚ ÓÌ ‚Ó¯ÂÎ ‚ Á‡ˆÂÔÎÂÌËÂ Ò ÂÁ¸·ÓÈ Ë

Á‡·ÎÓÍËÓ‚‡Î ÏÛÙÚÛ. á‡ÚÂÏ ÔÓ‚ÓÓÚÓÏ

ÙËÍÒËÛ˛˘Â„Ó ˚˜‡„‡ ÔÓ ˜‡ÒÓ‚ÓÈ ÒÚÂÎÍÂ

Á‡ÙËÍÒËÛÈÚÂ ˝ÚÛ ÌÓ‚Û˛ ‚˚·‡ÌÌÛ˛ Ì‡ÒÚÓÈÍÛ.

Ç˚·Ó Á‡„ÓÚÓ‚ÍË

Ç‡¯‡ ÓÚÂÁÌ‡ﬂ ÔËÎ‡ ÔÂ‰Ì‡ÁÌ‡˜ÂÌ‡ ‰Îﬂ ÂÁÍË

ÒÚ‡Î¸Ì˚ı Ë ·ÂÚÓÌÌ˚ı ÚÛ·. êÂÁÍ‡ ‰Â‚ÂÒËÌ˚ ÌÂ

ÂÍÓÏÂÌ‰ÛÂÚÒﬂ. çÂ Ô˚Ú‡ÈÚÂÒ¸ ÛÒÚ‡Ì‡‚ÎË‚‡Ú¸ Ì‡

Ï‡¯ËÌÛ ÔËÎ¸Ì˚È ‰ËÒÍ!

èÛÒÍ Ë ÓÚÍÎ˛˜ÂÌËÂ Ï‡¯ËÌ˚

å‡¯ËÌ‡ ÒÔÓÒÓ·Ì‡ ‡·ÓÚ‡Ú¸ ÔË 3600 Ó·ÓÓÚ‡ı ‚

ÏËÌÛÚÛ ·ÂÁ ÔÂÂ„ÛÁÍË ‰‚Ë„‡ÚÂÎﬂ. ÑÎﬂ ÔÛÒÍ‡ Ï‡¯ËÌ˚

Ì‡‰Ó ÔÓ‰ÍÎ˛˜ËÚ¸ Âﬁ Í ÒÂÚË ÔËÚ‡ÌËﬂ, Ì‡Ê‡Ú¸

‚˚ÍÎ˛˜‡ÚÂÎ¸ ‚ ÔÓÎÓÊÂÌËÂ «ON» (Çäã) Ë ÔÓÚﬂÌÛÚ¸ Á‡

‡ÒˆÂÔÎﬂ˛˘ËÈ ˚˜‡„. óÚÓ·˚ ÓÚÍÎ˛˜ËÚ¸ Ï‡¯ËÌÛ,

Ì‡‰Ó ‚ÂÌÛÚ¸ ‡ÒˆÂÔÎﬂ˛˘ËÈ ˚˜‡„ ‚ ËÒıÓ‰ÌÓÂ

ÔÓÎÓÊÂÌËÂ.

Ç˚ÔÓÎÌÂÌËÂ ÂÁÍË

1. Ç˚·‡Ú¸ Û„ÓÎ ÂÁÍË Ë ‚˚ÒÚ‡‚ËÚ¸ ÒÓÓÚ‚ÂÚÒÚ‚ÂÌÌÓ

˝ÚÓÏÛ ÛÔÓ Ë Á‡ÊËÏÌÓÈ ·ÎÓÍ. (ëÏÓÚË ÛÍ‡Á‡ÌËﬂ

‚˚¯Â, ‚ ‡Á‰ÂÎÂ

«îËÍÒËÓ‚‡ÌËÂ Á‡„ÓÚÓ‚ÍË Ë Â„ÛÎËÓ‚Í‡ Û„Î‡

ÂÁ‡».)

2. èÓÎÓÊËÚ¸ Á‡„ÓÚÓ‚ÍÛ „ÓËÁÓÌÚ‡Î¸ÌÓ Ì‡ ‡·Ó˜ËÈ

ÒÚÓÎ Ï‡¯ËÌ˚. èÓ‚Ó‡˜Ë‚‡Ú¸ ÔÓ ˜‡ÒÓ‚ÓÈ ÒÚÂÎÍÂ

˚˜‡„ Á‡ÊËÏÌÓ„Ó ·ÎÓÍ‡ ‰Ó ÚÂı ÔÓ, ÔÓÍ‡ Á‡„ÓÚÓ‚Í‡

ÌÂ ·Û‰ÂÚ ÍÂÔÍÓ Á‡Ê‡Ú‡.

3. èÓ‰ÍÎ˛˜ËÚ¸ Ï‡¯ËÌÛ Í ÒÂÚÂ‚ÓÈ ÓÁÂÚÍÂ, Ì‡Ê‡Ú¸

‚˚ÍÎ˛˜‡ÚÂÎ¸ ‚ ÔÓÎÓÊÂÌËÂ «Çäã» Ë ÔÓÚﬂÌÛÚ¸ Á‡

‡ÒˆÂÔÎﬂ˛˘ËÈ ˚˜‡„. Ñ‡Ú¸ ÏÓÚÓÛ Ì‡·‡Ú¸

ÔÓÎÌ˚Â Ó·ÓÓÚ˚. åÂ‰ÎÂÌÌÓ ÓÔÛÒÚËÚ¸ „ÓÎÓ‚ÍÛ

Ï‡¯ËÌ˚ ‚ÌËÁ Í Á‡„ÓÚÓ‚ÍÂ. êÂÁÍÛ ÚÂ·ÛÂÚÒﬂ ‚ÒÂ„‰‡

‚˚ÔÓÎÌﬂÚ¸ ÏÂ‰ÎÂÌÌÓ Ë ÓÒÚÓÓÊÌÓ. çÂÎ¸Áﬂ

ÔÓ‰‚Ó‰ËÚ¸ ‰ËÒÍ Í Á‡„ÓÚÓ‚ÍÂ ˚‚Í‡ÏË. Ç ˆÂÎﬂı

·ÂÁÓÔ‡ÒÌÓ„Ó Ë ˝ÙÙÂÍÚË‚ÌÓ„Ó ÔÓˆÂÒÒ‡ ÂÁÍË

Ì‡‰Ó Ì‡Ô‡‚ÎﬂÚ¸ ‰ËÒÍ Í‡Í ÏÓÊÌÓ ·ÎËÊÂ Í

ˆÂÌÚ‡Î¸ÌÓÈ ÓÒË Á‡„ÓÚÓ‚ÍË.

èÓ ÓÍÓÌ˜‡ÌËË ÔÓˆÂÒÒ‡ ÂÁÍË ÔÓÎÌÓÒÚ¸˛

ÔÓ‰ÌﬂÚ¸ „ÓÎÓ‚ÍÛ Ï‡¯ËÌ˚. á‡ÚÂÏ Á‡·ÎÓÍËÓ‚‡Ú¸

‡ÒˆÂÔÎﬂ˛˘ËÈ ˚˜‡„, ‰‡Ú¸ ÏÓÚÓÛ ÓÒÚ‡ÌÓ‚ËÚ¸Òﬂ

Ë ÓÚÍÎ˛˜ËÚ¸ Ï‡¯ËÌÛ.

èË ‡·ÓÚÂ Ï‡¯ËÌ˚ ÌÂ ÔÓÁ‚ÓÎﬂÈÚÂ, ˜ÚÓ·˚

Ó·‡ÁÛ˛˘ËÂÒﬂ ËÒÍ˚ ÒÚ‡ÎË ÔË˜ËÌÓÈ

‚ÓÁ„Ó‡ÌËﬂ ËÎË ‚Á˚‚‡.

è˚ÎÂÛ‰‡ÎÂÌËÂ:

èÓ‰ÒÓÂ‰ËÌËÚ¸ Ó·‡ ¯Î‡Ì„‡ ‚˚ÚﬂÊÌÓÈ ÛÒÚ‡ÌÓ‚ÍË Í

ÓÒÌÓ‚‡ÌË˛ ÓÚÂÁÌÓÈ ÔËÎ˚. ÇÍÎ˛˜‡Ú¸ ÒÌ‡˜‡Î‡ ÒÎÂ‰ÛÂÚ

Ô˚ÎÂ‚˚ÚﬂÊÍÛ, ‡ Á‡ÚÂÏ ÛÊÂ - Ò‡ÏÛ Ï‡¯ËÌÛ.

5. íÖïçàóÖëäéÖ

éÅëãìÜàÇÄçàÖ

éÚÒÓÂ‰ËÌËÚÂ Ï‡¯ËÌÛ ÓÚ ÒÂÚË ‚Ó ËÁ·ÂÊ‡ÌËÂ

Ú‡‚ÏËÓ‚‡ÌËﬂ, ÂÒÎË Ç‡Ï ÌÂÓ·ıÓ‰ËÏÓ ÔÓËÁ‚ÂÒÚË

‡·ÓÚ˚ ÔÓ ÚÂıÌË˜ÂÒÍÓÏÛ Ó·ÒÎÛÊË‚‡ÌË˛ ÏÂı‡ÌËÁÏ‡.

á‡ÔÂ˘‡ÂÚÒﬂ ‡Á·Ë‡Ú¸ Ï‡¯ËÌÛ ËÎË ÏÂÌﬂÚ¸ Âﬁ

‚ÌÛÚÂÌÌ˛˛ ˝ÎÂÍÚÓÔÓ‚Ó‰ÍÛ.

Ferm 65

MACHINE INSTRUCTIONS

1. Do not start cutting until the motor has attained full

speed.

2. If, while operating the machine, the disc no longer

turns or the motor sounds overloaded, switch off the

machine immediately.

3. Keep easily flammable or fragile objects away from

the machine. The machine operator must avoid let-

ting his or her hands, face or feet come into contact

with the sparks caused when cutting.

4. Position your machine firmly on a flat, even surface.

5. Only operate the machine at the voltage stated on

the nameplate.

6. Never touch a sawn-off workpiece, always let it cool

down first.

7. Never attempt to cut workpieces which exceed the

permitted size.

8. During cutting, never position yourself in the direc-

tion of cutting. Always remain to one side.

9. Always leave safety devices installed.

10. Always ensure that you cut slowly and carefully.

Avoid applying the disc to the workpiece with a jerky

motion.

11. Never push the workpiece onto the disc with your

bare hands. Always use a chuck block and a guard to

fix the workpiece.

3. INSTRUCTIONS FOR

CONNECTING THE PROTECTIVE

CONDUCTOR

Equipment with a protective conductor connec-

tion:

Equipment with three-conductor mains power cable.

The protective conductor inside the mains power cable

has a green or green-yellow insulating cover. If the mains

power cable needs repairing or replacing, never connect

the protective conductor to the phase or neutral con-

ductor connections. Furthermore, such repair work

should only be carried out by a qualified electrician.

WARNING!

In case of malfunction or a defect in the machine,

the protective conductor offers the leakage current

the path of least electric resistance and hence reduces the risk

of electric shock. If you are ever in doubt about whether a pro-

tective conductor is wired up correctly, consult a qualified elec-

trician or service technician. Do not, under any circumstances,

change the machine's mains power plug if it does not fit into

the available socket; get a qualified electrician to install a soc-

ket for you. Never use extension leads which are not connec-

ted to the protective conductor. Get damaged or sheared

mains cables repaired immediately and do not continue to use

the machine until the mains cable has been replaced or repai-

red.

1. Securing a plug with a protective conductor

2. Mains socket

3. Protective conductor connection, mains plug

4. Protective conductor connection, socket

4. OPERATING INSTRUCTIONS

Before securing or mounting accessories, always

unplug from the mains, to reduce risk of injury. Only

use recommended accessories; other accessories can cause

risk.

Using the safety chain

The machine is fitted with a safety chain, which locks the

handle when transporting and storing the machine. You

can release the safety chain by pushing the handle down

and pulling the chain off the hook. To lock the chain, pull

the handle down and pull the chain over the hook.

To reduce the risk of injury, only use approved discs

with this machine. Never use saw blades.

Removing and installing cutting discs

1. Release the safety chain, by pushing the handle down

and BY pulling the chain down off the hook.

2. Pull back the moving part of the safety device. The

hexagonal screw is now accessible. Push the spindle

lock down, and use the hexagonal screw wrench pro-

vided to loosen and remove the hexagonal screw

(turn anti-clockwise).

3. Remove the hexagonal screw, the lock washer, the

flat washer, the outer flange, the collar, and the disc if

installed.

4. Check that the (2) disc flanges are in good condition.

Remove any dirt, which could lead to uneven sawing

and disc damage.

5. Install the inner and outer flange of the disc, the col-

lar, the flat washer, the lock washer, and the hexago-

nal screw, as illustrated on the right. Press down the

spindle lock, whilst using the hexagonal screw

wrench provided to tighten the hexagonal screw

(turn clockwise).

6. Put the moving part of the safety device back into its

original position.

7. Before starting to cut, first do a test run, i.e. take a

step back, leave the motor running and ensure that

the disc is in good condition. After changing the disc,

always let the disc cutting saw test-run for three

minutes; thereafter, for one minute before starting

any routine work.

Adjusting cutting depth

The cutting depth adjustment plate can be moved, in

order to change the cutting depth. If the disc does not

touch the surface under the sawing table during cutting,

the cutting depth must be increased, due to disc wear

during use.

1. To change the cutting depth, loosen and remove the

wing nut (turn anti-clockwise).

2. Adjust the cutting depth adjustment plate, as shown

on the right, to set the new cutting depth.

3. Replace the wing nut and tighten it by turning it cloc-

kwise.

4 Ferm

Ferm COM1003 - AM-355 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info