Ferm 53
DK
04 Ferm
CORDLESS DRILL
The numbers in the text refer to the diagrams
on pages 2 - 3.
Read the operating instructions
carefully before using this device.
Familiarise yourself with its functions
and basic operation. Service the device
as per the instructions to ensure that it
always functions properly. The
operating instructions and the
accompanying documentation must be
kept in the vicinity of the device.
Contents
1. Machine information
2. Safety instructions
3. Mounting accessories
4. Operation
5. Service & maintenance
1. MACHINE INFORMATION
Technical specifications
Contents of packing
1 Cordless drill
2 Batteries
1 Adapter + battery holder
13 Accessories
1 Operating instructions
1 Safety instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
Product information
Fig. A
1. On/off switch
2. Torque setting ring
3. Chuck
4. Battery
5. Direction switch
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Rotation, left/right.
The number of revolution of the
machine can be electronically set.
Do not use in rain.
Indoor use only
Maximum temperature 40 °C.
Do not throw the battery into fire.
Do not throw the battery into water.
Thermic protection 130 °C.
In case of failure, the transformer in not
dangerous (separated circuit).
Ni-Cd batteries can be recycled. Drop
them off at a disposal center for
chemical wastes, so that they can be
recycled or disposed of in an eco-
friendly manner.
Voltage 18 V
—
---
Charger voltage 230 V~
Charger frequency 50 Hz
Battery output 1.2 Ah
Charging time 3-5 hours
Max. torque (low speed) 12 Nm
No-load speed 0-900/min
Chuck capacity 0.8-10 mm
Weight (incl. battery) 1.6 kg
Lpa (sound pressure) < 75 dB(A)
Vibration < 2.5 m/s
2
GB
