Ferm 91
UK
D
NL
F
E
P
I
S
SF
N
DK
06 Ferm
ensure protection from electric shocks, injury and fire. Read and follow all the instructions
before using this power tool.
Look after the notes on safety.
• Remove the battery block. When the power tool is not being used, prior to maintenance
and when changing tools such as the clamping chuck, and drill.
• The tool is suitable for use as a screwdriver and drill. Any other application is specifically
excluded.
Important safety notes on charger and battery block
If you come into contact with acid from the battery block, rinse it off with water immediately. If
acid gets into your eyes, rinse out your eyes at once with water and contact a doctor
immediately!
1. Read and note the operating instructions and safety notes for the charger and battery
block before use!
2. NB! Only use the charger and battery block that were supplied by the manufacturer -
otherwise you will risk an accident.
3. Protect the charger, battery block and power tool
from moisture, e.g. rain or snow.
4. Always check that all cables are connected correctly before using the charger.
5. If you discover that a cable is damaged, you should not use the charger again. Have the
damaged cable replaced immediately.
6. When the charger is not in use, the mains plug should be removed from the power socket.
Do not pull out the plug by grasping the cable.
7. If the charger has been dropped or has otherwise been exposed to high mechanical
stresses, you should have it checked for damage by an authorised dealer before using it
again. Damaged parts should be repaired.
8. Exercise caution when handling the battery block and do not drop it or expose it to
impacts.
9. Never attempt to repair the charger or battery block yourself. Repairs must always be
carried out by an authorised dealer - otherwise you risk an accident.
10. Before cleaning or servicing the charger or battery block, always pull the plug from the
charger socket.
11. Never charge the battery block when the ambient temperature is below 5°C or above
40°C.
12. The air vents in the charger must never be blocked.
13. The battery block must not be short-circuited.
A short-circuit will cause a high current to flow. This may result in overheating, the
danger of fire or explosion of the battery block. This may damage the battery block
or the user may risk an accident.
Therefore
• Do not connect any cables to the poles of the battery block.
• Take care that there are no metal objects (nails, paper clips, coins, etc.) on the contact
surface of the battery block.
• Do not expose the battery block to water or rain.
GB
D
NL
F
E
P
I
S
SF
N
DK
