Ferm 05
9. Maintain the tool with care.
• The tool works best and safest if it is kept clean.
• Observe the instructions for maintenance and changing accessories. Keep the tool
dry and free from oil and grease.
10. Disconnect the machine.
Disconnect the machine when you do not use it, before cleaning and when changing
accessories and tools.
11. Extension cable for outdoor use.
When working outdoors use only extension cables suitable for this purpose and marked as
such. When using machines with earth-connection, use an extension cable with earth-
connection.
12. Stay alert.
Watch what you are doing, use your common sense, do not operate the tool when you
cannot concentrate on the job.
13. Check the machine for damage.
• Before starting the machine, check that all safety devices and damaged parts operate
smoothly and efficiently;
• If not stated otherwise in this manual, damaged safety devices and machine parts
must be repaired or replaced by a recognized service centre. Damaged switches must
be replaced by a service centre. Do not use the machine when it cannot be switched on
or off.
Special safety instructions
In the design of the battery charger the requirements for safe usage have been taken into
account. Any change, adaptation, conversion or other use may interfere with the safety of the
apparatus. In addition, the guarantee will no longer be valid because of this.
• Check the following things:
• Does the voltage of the battery charger correspond to the mains voltage. Battery
chargers with the indication of 230 Volt can also be used when there is a mains voltage
of 220 Volt.
• Are the mains lead and the mains plug in good condition.
• Avoid the use of long extension cables for the battery charger.
• Do not try to open the housing of the battery, because dangerous substances may be
released.
• Do not use the battery charger where there is moisture.
• Do not expose the battery (and the charger) to vivid sunlight and high temperatures.
• During charging the battery acid may start to boil, which is not unusual. Beware of
splashing, however, for battery acid is caustic. The battery charger therefore needs to be
switched off in order to prevent accidents and to allow the battery to cool down.
• During charging so-called detonating gas can be liberated. That is why the filler caps are
unscrewed before charging(does not apply to closed batterys, this means Battery
chargers without filler caps). Charging has to take place in a thoroughly ventilated space.
• The battery charger does not stop automatically after charging. For this reason it needs to
be switched off and disconnected from the battery. Do not leave the battery charger
connected to the mains voltage after the battery has been charged completely.
GB
68 Ferm
Garantibevis
Med hensyn til garantibetingelserne, refereres til garantibeviset, der følger separat med.
Vi erklærer herved, udelukkende på eget ansvar, at dette
BATTERIOPLADER 5A/12V
opfylder følgende standarder eller standardiserede dokumenter:
EN60335-1, EN60335-2-29, EN55014-1, EN55014-2, EN61000-3-2
i henhold til følgende direktiver:
73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
frå 01-01-2007
ZWOLLE NL
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
Vores firmapolitik bygger på løbende forbedring af vores produkter, og vi forbeholder os retten
til at ændre produktspecifikationer uden varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
CE
KONFORMITETSERKLÆRING (DK)
DK
