42 Ferm
SPARE PARTS LIST FAG-230/2000
FERM NR DESCRIPTION REF NR
406940 FLANGE OUTSIDE 1
406941 FLANGE INSIDE 3
406942 WHEEL COVER 4
406943 SPINDLE GEAR 18
406944 PINION GEAR 28
406945 ROTOR 32
406946 STATOR 35
406947 BRUSH HOLDER 42
406948 CARBON BRUSH SET (2PCS) 43
406949 BRUSH CAP 44
406950 SWITCH 51
406877 SIDE HANDLE 59
406814 SPANNER 60
ANGLE GRINDER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
Read this operators guide carefully, before using
the machine. Ensure that you know how the
machine works, and how it should be operated. Maintain the
machine in accordance with the instructions, and make
certain that the machine functions correctly. Keep this
operator’s guide and other enclosed documentation with the
machine.
CONTENTS:
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
INTRODUCTION
This machine is developed for grinding and roughing of
metal and stone.
TECHNICAL SPECIFICATION
PACKAGE CONTENTS
1Angle grinder
1Side handle
1 Spanner
1Set carbon brushes
1Instruction manual
1Safety instructions
1Warranty card
FEATURES
Fig.1
1. on/off switch
2. screw-on lid carbon brush (both sides)
3. spindle lock
4. grinding disc
5. side handle
6. lock-off button
2. SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the
appropriate recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
Always check that the power supply corresponds to
the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 2000 W
No-load speed | 6000/min
Disc diameter | 230 mm
Spindle dimension | M 14
Weight | 4,9 kg
Lpa (sound pressure) | 97,9 dB (A)
Lwa (sound power) | 110,9 dB (A)
Vibration value | 3,2 m/s2
Ferm 3
