1. Press down and hold the device button which you wanted to learn (e.g. BD
player), and press find button at the same time, when LED turns on then
release the both pressed keys, now remote control is in learning mode for
BD codes.
2. Point the IR transmitter of the original remote control remotes face to the IR
receiver of your RCU650 remote by approximately 30 mm apart. Keep two
remotes at the same straight line to make the learning process more
accurate.
3. Press and release the target button on your RCU650 remote control which
you want to learn (e.g. info), the LED starts to flash.
4. Press the one button (For example, info button) from your original remote
control, when you see LED on new universal remote control flashes three
times and stop, it means RCU650 has accepted new code and now you can
start to learn another new code from original remote.
5. Repeat step 3 to 4 to learn another code from original remote control.
6. When you finish learning all buttons you want to have, press find button to store all
commands you have learnt from original remote and exit from Learning remote.
Note:
• You can learn limited set of buttons on RCU. Available buttons are shown on the image.
• When you can not choose any more buttons from new universal remote control for learning,
it means new remote memory is full (RCU650 has limit for total 60 buttons).
•
The learning mode is automatically terminated if no entry occurs during 14 seconds period.
• Press TV button and Number 6 button can delete all codes you have learnt for all devices.
Display device code
1. Press and hold the device button, simultaneously press button 1 to display the thousands of
the 4-figure code, Count how often the LED flashes, if the LED does not flash, 1. then the
number is zero.
2. Press and hold the device button, simultaneously press button 2 to display the hundreds of
the 4-figure code.
3. Press and hold the device button, simultaneously press button 3 to display the tens of the
4-figure code.
4. Press and hold the device button, simultaneously press button 4 to display the ones of the
4-figure code.
For example for code 0169 for TV:
1. Press TV and 1 LED flashes Zero time
2. Press TV and 2 LED flashes One time
3. Press TV and 3 LED flashes Six times
4. Press TV and 4 LED flashes Nine times
Reset / Delete Function
Just simply press TV button and Button 0 together, when LED flashes three times, now all
settings will be deleted, and remote go back to factory default settings.
9
