3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has
reached room temperature.
OVERVIEW
1. LED DISPLAY
2. BUTTON CLUSTER
Mode – Press to change modes
Previous track – Play the previous track
Play/Pauze – Start/resume or pause play by pressing this button
Next Track – Skip to next track
Rec/Prio – Press for record function. Hold to give microphone signal priority. When speaking through the microphone, the
music volume will be muted
LED - Turn the LED light show on/off
3. MICROSD PORT
Insert a MicroSD card in this slot.
4. USB PORT
USB entry port.
5. AUX INPUT
3.5mm auxiliary line input jack.
6. MICROPHONE INPUT JACK 6.3MM
7. MICROPHONE INPUT JACK 6.3MM
8. MICROPHONE VOLUME CONTROL
Turn to adjust the microphone volume.
9. ECHO CONTROL
Turn to change the echo effect.
10. TREBLE CONTROL
Turn to change the treble setting.
11. BASS CONTROL
Turn to change the bass setting.
12. MASTER VOLUME
Turn to adjust the overall output level/volume.
13. POWER ON/OFF SWITCH
Turn the device on/off.
14. POWER SUPPLY INPUT
REMOTE CONTROL FUNCTION
1. POWER ON/OFF
Turn the device ON or OFF.
2. MODE
Press to choose between USB/SD, BT.
3. MUTE
By pressing this button, the device will be muted.
4. PLAY/PAUSE
Start/resume or pause play by pressing this button.
5. PREVIOUS/NEXT TRACK
Skip to previous or next track by pressing these buttons.
6. EQ
Press to choose EQ preset.
7. VOLUME UP/DOWN
Press to adjust the volume to the desired level.
8. USB OR SD
Choose between USB and SD input modes.
9. REPEAT
Press to repeat one song or complete folder.
10. NUMPAD
Use for choosing tracks directly.
BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the “MODE” button and activate the BT-function.
3. Select “MOVE80” on your BT device and pair.
Attention: BT distance is approx. 10 meter without any barrier.