N. POWER SWITCH - Switches the amplifier on-off.
O. IEC POWER SOCKET - Connect the power cord
(included) to a grounded AC receptacle in
compliance with the voltage and frequency ratings
specified on the rear panel of your amplifier.
P. TUNER - Connect your guitar tuner here. Use
MUTE {I} to silence audio output while tuning.
Q. LINE OUT - Balanced XLR jack for output to sound
reinforcement and recording equipment.
R. GROUND LIFT - Disconnects the LINE OUT {Q}
ground connection (pin-1) which may reduce hum
noise in some situations.
GROUNDED (normal) GROUND LIFTED
S. PRE/POST EQ - Supplies the LINE OUT jack with
the signal either before or after it is processed by the
amplifier’s tone and equalization circuits.
PRE (tone/EQ bypassed)
POST (tone/EQ active)
T. LINE OUT LEVEL - Adjusts the signal output level
of the LINE OUT jack {Q}.
U. FOOTSWITCH - Connect the included footswitch to
enable remote on-off switching of REVERB,
TUNER MUTE and the EFFECTS LOOP. NOTE:
When connected, the footswitch buttons override
the corresponding controls on the front panel.
V. FX SEND / FX RETURN - (1) Effects Loop -
Connect FX SEND to your effects input and effects
output to FX RETURN. (2) Multiple Amps - Connect
FX SEND on the primary unit to FX RETURN on the
auxiliary unit. The primary unit controls all auxiliary
units.
7
SS
SS
pp
pp
ee
ee
cc
cc
ii
ii
ff
ff
ii
ii
cc
cc
aa
aa
tt
tt
ii
ii
oo
oo
nn
nn
ss
ss
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
TYPE: PR 411
PART NUMBERS: 2289500000 (120V, 60Hz) USA 2289503000 (240V, 50Hz) AUS 2289504000 (230V, 50Hz) UK
2289506000 (230V, 50Hz) EUR 2289509000 (220V, 60Hz) ROK
POWER REQUIREMENT: 540W
PREAMP
INPUT IMPEDANCE: PASSIVE: 1MΩ ACTIVE: 1MΩ
SENSITIVITY AT FULL POWER: PASSIVE: 19mV ACTIVE: 40mV
NOMINAL LEVEL: PASSIVE: 145mV ACTIVE: 300mV
POWER AMP
SENSITIVITY: 1.4V R.M.S., 1kHz
POWER OUTPUT: 200W R.M.S. into 4Ω @ < 0.02 % T.H.D., 1 kHz
TONE CONTROLS
EQ TILT: ±10dB, crossover frequency: 350Hz
BASS/TREBLE: BASS: ± 15dB @ 50Hz TREBLE: ± 15dB @ 10kHz
SEMI-PARAMETRIC MID: MID FREQ: 200Hz to 1.0 kHz MID LEVEL: ±15dB @ MID FREQ setting
EFFECTS LOOP
IMPEDANCES: SEND: 1kΩ RETURN: 22kΩ
NOMINAL LEVEL: +4dBu (adjustable with level control)
FOOTSWITCH: Three button, included: Reverb, Tuner Mute, Effects Loop (064544)
SPEAKER: One 15", 4Ω Fender
®
Custom 15 Driver, made in USA by Eminence
®
(064398)
FITTED COVER: Included (065532)
DIMENSIONS: HEIGHT: 21 in (53.3 cm) WIDTH: 20 in (50.8 cm) DEPTH: 12.5 in (31.8 cm)
WEIGHT: 65 lb (24.3 kg)
Product specifications are subject to change without notice.
RR
RR
ee
ee
aa
aa
rr
rr
PP
PP
aa
aa
nn
nn
ee
ee
ll
ll
