T. POWER CORD - Connect the power cord in
accordance with the voltage and frequency ratings
listed on the rear panel of the unit.
U. FUSE - The fuse protects the unit from electrical
faults. Replacement fuses must match the type and
rating specified on the fuse holder. If the unit
repeatedly blows fuses, have the unit tested at an
authorized Fender
®
Service Center.
V. MAIN SPEAKER - One of the following speaker load
configurations (internal or external) must always be
connected as shown below, when the unit is on:
*Insert an open plug (no speakers connected) for this
configuration.
W. EXTERNAL SPEAKER - This jack is wired in parallel
with the main speaker jack and must only be used
with something connected to the main speaker jack
as shown in the MAIN SPEAKER {V} description
above.
X. FENDER
®
/GROOVE TUBES™ GT6L6B - The
output tubes in your new Hot Rod™
amplifier are performance matched and
labeled as a color-coded pair. When
replacing these tubes, we recommend
selecting new tubes that have the same red, white or
blue color labels as the originals. Otherwise, tube
bias may need adjustment. See Specifications
below for your color coded part number.
Y. PREAMP TUBE STABILIZER -
A vibration–absorbing stabilizer is
installed around the preamp tubes to
minimize tube microphonics that
normally develop over time. The stabilizer can be
used with all preamp tubes compatible with your
Hot Rod™ amplifier.
TYPE: PR 247
PART NUMBERS: 021-3202-000 (120V, 60Hz) USA
021-3232-000 (240V, 50Hz) AUS
021-3242-000 (230V, 50Hz) UK
021-3262-000 (230V, 50Hz) EUR
021-3272-000 (100V, 50/60Hz) JPN
POWER REQUIREMENT: 180W
POWER OUTPUT: 40W into 8Ω or 4Ω at 5% THD
INPUT 1/2 IMPEDANCES: 1 MΩ / 136 kΩ
PRE-AMP OUTPUT IMPEDANCE: 1.5 kΩ Max
POWER-AMP INPUT SENSITIVITY: 200 mV for clipping
POWER-AMP INPUT IMPEDANCE: 54 kΩ
TUBES: Three Fender Groove Tube GT12AX7 (099-4005-000)
*(Tube label color: Red=1, White=2, Blue=3) Two Fender Groove Tube GT6L6B (099-4401-*02)
FUSE: 3A 250V fuse (100V and 120V versions)
1.6A 250V fuse (230V and 240V versions)
SPEAKER: One 12” 8Ω Fender Re-issue
Gold Label (037617)
FOOTSWITCH: 2 Button: Gain, Channel (050419)
DIMENSIONS HEIGHT: 18.75 in (47.6 cm)
WIDTH: 23.5 in (59.7 cm)
DEPTH: 10.5 in (26.7 cm)
WEIGHT: 49.5 lb (22.5 kg)
Product specifications are subject to change without notice.
7
Specifications
Specifications
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
Fender
Fender
®
®
Hot Rod™ Deluxe
Hot Rod™ Deluxe