MAC
SECTION 3 - SENDING PRESETS FROM A PC TO THE G-DEC
Loading A Custom Preset into the G-DEC
So, now we need to learn how to load a preset into the G-DEC. Let’s say you received a custom preset in a
SysEx file from a friend. For demonstration, we will just load the file we just created in the dump back into
the G-DEC. First, make sure the file you want to send is highlighted as shown in figure 11. If the file you
want to load into the G-DEC is not located in the main application window, then simply click on the
“Add…” button in the lower left of the application window or select “Add to Library…” in the File menu
(shown in figure 12). Then select the file you want to send to the G-DEC (a valid G-DEC preset SysEx file
only). The file will then appear in the SysEx Librarian listing. Select the file listing and then click on the
“Play” icon in the upper left of the main application window. This will send the file to the G-DEC. Now the
G-DEC should be prompting you to save a preset. Select a location to save the new preset and press the
Save button. Your new preset is now saved into the G-DEC.
