INSERT Jacks
Use a stereo “Y-Cord,” wired as illustrated below, to connect
external effects devices to the INSERT jacks.
LINE OUT Jacks
Fully insert TS plugs into LINE OUT jacks to disconnect the
Acoustasonic SFX II internal power amps. Pull plugs out one
“click” to supply both the internal power amps and the line
outputs with signal.
•Line outs = Enabled •Power amps = Disabled
•Line outs = Enabled •Power amps = Enabled
TYPE: PR 542
PART NUMBER: 2213100010 (120V, 60Hz) USA 2213103010 (240V, 50Hz) Aust
2213104010 (230V, 50Hz) UK 2213106010 (230V, 50Hz) Eur
2213107010 (100V, 50/60Hz) Jpn
POWER REQUIREMENTS: 400W
POWER
AMPLIFIER SECTION
POWER OUTPUT: 80W R.M.S. per channel, (160W R.M.S. Total)
into 8Ω, both channels driven
PREAMP SECTION
INPUT IMPEDANCE: 10MΩ (Inst), 3.6kΩ (Mic), 36.4kΩ (Line)
TONE CONTROLS: Treble: +/-15dB @ 15kHz
Mid: +/-12dB @ 1kHz
Bass: +/-12dB @ 100Hz
FEEDBACK NOTCH: -10dB from 66Hz to 720Hz (Inst)
-10dB from 72Hz to 7.2kHz (Mic, Line)
STRING DYNAMICS: 0 to -15dB @ 6.3kHz (Inst)
PHANTOM VOLTAGE: +15V DC (Mic)
SPEAKER COMPLEMENT: One 8" Fender Special Design speaker (P/N 059773)
One 6.5" Fender Special Design speaker (P/N 059883)
One Piezo Horn (P/N 049260)
DIMENSIONS: Height: 22.7 in (57.7 cm)
Width: 22.8 in (57.9 cm)
Depth: 11.5 in (29.2 cm)
WEIGHT: 54 lb (24.5 kg)
Product specifications are subject to change without notice.