470116
2
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
Your “new” ‘63 VIBROVERB amplifier is living proof of the
quality and longevity of Fender amplifier designs.
Fender first introduced the VIBROVERB in the early part of
1963. Unlike many of the other Fender amplifiers that
were produced for years, this version of the VIBROVERB
had a production life of less than 4 months. It is estimated
that fewer than 600 VIBROVERB units were ever produced.
This limited production is one of the reasons this amplifier
has become highly sought after by vintage amp collectors.
The VIBROVERB was the first Fender production model to
have both reverb and vibrato as built-in “effects”.
The original VIBROVERB shows Fender in a transitional
period with amplifiers changing from tweed covering to
brown “Tolex” and eventually to black “Tolex.” In the sum-
mer and fall of 1963, Fender changed the speaker configu-
ration of the VIBROVERB to a 15 inch speaker and the
brown “Tolex” covering changed to black. The single 15
inch model is also fairly rare, but the 2-10 version is leg-
endary.
Fender’s ‘63 VIBROVERB re-issue amplifier is based on the
original cosmetics, sound and circuit. Every effort was
made to be true to the original.
Several changes have been made for safety and reliability
reasons. A printed circuit board is used rather that the
phenolic “parts panel” of the sixties. A 3-prong line cord is
required for safety reasons. Minor modifications to the cir-
cuit took place since certain parts are no longer available,
but every effort was made to keep the original circuit values
and sound the same. We resisted the temptation to
“improve” the amp with features found on later models like
master volume, effects loop or channel switching. In order
to improve reliability, a solid state rectifier was used rather
than a 5AR4 tube. Since the ‘63 VIBROVERB uses a solid
state rectifier, there is one less tube and tube socket than an
original VIBROVERB. All internal circuit voltage values
have been precisely matched to the new solid state rectifier
to insure exact sonic reproduction and no alterations to the
“vintage” sound. On the original model, the Reverb /
Vibrato Footswitch connected to the unit via 2 RCA style
jacks; this has been changed to a more reliable 1/4” jack.
The reverb pan cables now connect more securely to the
chassis also.
The VIBROVERB is unique in Fender amplifier history by the
implementation of its tone circuit. The VIBROVERB was the
first and ONLY Fender amplifier to use this type of tone cir-
cuit. The treble control is “tapped,” meaning it responds
more like an active tone control allowing boost AND cut of
high frequencies. Conventional Fender tone circuits pro-
vide a small amount of tone shaping even in the “0” posi-
tion, but if the VIBROVERB Treble Control is set to about
“5”, the response is flat.
The speakers used in the ‘63 VIBROVERB are reproductions
of the original speakers made by the Oxford Speaker
Company. When Fender started work on this project,
Fender contacted Oxford who still had much of the original
tooling and documentation of this 10 inch speaker from the
early sixties.
The power and output transformers used in the ‘63
VIBROVERB are built to the original specifications, which
are still in the R&D engineering files at Fender’s office. The
same “direct-coupled” oscillator circuit is used for generat-
ing the vibrato. The reverb sound from the VIBROVERB is
“warmer” than later Fender amps due to the unique reverb
send and recovery circuit.
The cosmetics of the ‘63 VIBROVERB incorporate the brown
“Tolex” and “Ecru” grill cloth used in 1963. We have re-
tooled the “flat” Fender logo and have added the original
tilt-back legs found on so many Fender amps through the
sixties and seventies.
It is suggested that you read this manual thoroughly to
understand all the features and functions of your new
amplifier. The purchase of a Fender amplifier will provide
years of musical enjoyment and the ‘63 VIBROVERB helps
keep the Fender legend going strong.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR
MOISTURE!
INTRODUCTION
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fender 63 Vibroverb bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fender 63 Vibroverb in de taal/talen: Engels als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info