3
1. First
NOTE: We strongly urge you to read this Manual in its entirety before your rst
ride. At the very least, read and make sure that you understand each point in this
section, and refer to the cited sections on any issue which you don’t completely
understand. Please note that not all bicycles have all of the features described in
this Manual. Ask your dealer to point out the features of your bicycle.
A.Biket
1. Is your bike the right size? To check, see Section 3.A. If your bicycle is too
large or too small for you, you may lose control and fall. If your new bike is not
the right size, ask your dealer to exchange it before you ride it.
2. Is the saddle at the right height? To check, see Section 3.B. If you adjust
your saddle height, follow the Minimum Insertion instructions in Section 3.B.
3. Are saddle and seat post securely clamped? A correctly tightened saddle will
allow no saddle movement in any direction. See Section 3.B.
4. Are the stem and handlebars at the right height for you? If not, see Section
3.C.
5. Can you comfortably operate the brakes? If not, you may be able to adjust
their angle and reach. See Section 3.D and 3.E.
6. Do you fully understand how to operate your new bicycle? If not, before your
rst ride, have your dealer explain any functions or features which you do not
understand.
B.Safetyrst
1. Always wear an approved helmet when riding your bike, and follow the
helmet manufacturer’s instructions for t, use and care.
2. Do you have all the other required and recommended safety equipment?
See Section 2. It’s your responsibility to familiarize yourself with the laws of the
areas where you ride, and to comply with all applicable laws.
3. Do you know how to correctly secure your front and rear wheels? Check
Section 4.A.1 to make sure. Riding with an improperly secured wheel can cause
the wheel to wobble or disengage from the bicycle, and cause serious injury or
death.
4. If your bike has toeclips and straps or clipless (“step-in”) pedals, make
sure you know how they work (see Section 4.E). These pedals require special
techniques and skills. Follow the pedal manufacturer’s instructions for use,
adjustment and care.
5. Do you have “toe overlap”? On smaller framed bicycles your toe or toeclip
may be able to contact the front wheel when a pedal is all the way forward
and the wheel is turned. Read Section 4.E. to check whether you have toeclip
overlap.
6. Does your bike have suspension? If so, check Section 4.F. Suspension
can change the way a bicycle performs. Follow the suspension manufacturer’s
instructions for use, adjustment and care.
C. Mechanical Safety Check
Routinely check the condition of your bicycle before every ride.
Nuts,boltsscrews&otherfasteners: Because manufacturers use
