502495
5
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
5
TECHNICAL DATA
Circular saws SCF165/1200 SCF190/1600S SCF210/1900S SCF210/1900VES
Input power W 1200 1600 1900 1900
No-load speed rpm 4700 4800 5000 2300-5000
Saw blade diameter mm 165 190 210 210
Max./min. saw blade diameter mm 165/160 190/180 210/200 210/200
Max./min. set width mm 2,5 2,5 2,5 2,5
Saw blade hole diameter mm 20 20 30 30
Depth of cut at 90° mm 55 63 75 75
Depth of cut at 45°
mm 37 42 51 51
Depth setting mm 0-55 0-63 0-75 0-75
Inclination setting 0-45° 0-45° 0-45° 0-45°
Approx. weight (w/o
accessories) according
EPTAProcedure 01/2003
Kg. 4,5 5,6 6,4 7,8
Follow very carefully the instructions in this manual, save it
and keep it close at hand, ready to carry out any inspection
of parts that may be necessary.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the
tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See gures)
A HM saw blade. (Fig. 1)
B Riving knife setting screw (Fig. 1)
C Mobile blade guard (Fig. 1)
D Saw blade setting disc (Fig. 1)
E Disc setting screw (Fig. 1)
F Riving knife (Fig. 1)
G Depth setting wing nut (Fig. 2)
H Lateral stop setting wing nut (Fig. 3)
I Lateral stop (Fig. 1)
J Safety push button switch (Fig. 2)
K On-/off switch (Fig. 2)
M Cutting line guide (Fig.3)
N Sawdust extraction (Fig. 1)
EQUIPMENT
- 1 lateral stop
- 1 disc clamping key
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This tool is specially designed for straight sawing only of
boards made from wood and derivatives (plywood, chipboard
etc.).
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct:
it must be the same as that on the specication label.
Machines with 230V can also be connected to a 220V mains
supply.
Before plugging in the tool, always make sure the control
switch K works properly and returns to the OFF position
when released.
START UP
WARNING! Only plug in when machine is switched off.
Press the locking button J, and squeeze the trigger in the on/
off switch K. When the on/off switch is released, the machine
stops.
CONSTANT ELECTRONICS (SCF210/1900VES)
The built-in module permits:
- Soft start.
- The maintenance of a practically constant rated speed
up to rated power.
Overload protection
- The motor will stop if an overload occurs. The machine
should be immediately removed from the piece being worked
and allowed to operate off-load at maximum revolutions
during some thirty seconds in order to cool the motor.
FITTING THE DISC
WARNING! Always unplug the machine before carrying out
any work on it.
CAUTION: Do not use bent or cracked blades or high-speed
steel blades. Do not use saw blades that do not conform to
the specications contained in these instructions.
1. Move the mobile guard C backwards and hold it in
place.
2. To loosen or tighten the screw E with the key supplied with
the machine, secure the blade with the aid of a screwdriver
as follows: turn the blade guard to the side and turn the blade
until the hole lies under the saw shoe and insert a screwdriver
in the hole so that the blae does not move (or place the saw
on a piece of wood).
3. Loosen the screw E and remove the setting disc D.
4. Fit the saw blade and tighten with the setting disc D and
the screw E.
5. Before tting the new blade, make sure the surfaces in
contact with the setting discs are clean. The teeth of the saw
should protrude beyond the riving knife F. (The arrow printed
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Felisatti SCF165 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Felisatti SCF165 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info