784936
14
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
11
CONTROL PANEL OPERATION
3. Press the Light button to store the F1 cycle
and move to the F2 cycle.
4. Press the Plus or Minus button to adjust
the cycle time for F2.
5. Wait 15 seconds to allow the exit timer to
expire and store the setting.
IMPORTANT: To reset the first filter cycle start
time, skip step 5 and continue pressing the Mode
button until the actual temperature is displayed.
Powering down of the spa will also reset the first
filter start time.
FILTER CYCLE SUSPENSION:
The
filter cycle will be suspended every time a jet pump
or light is activated manually during the filter cycle
time. The suspension will end 10 minutes after the
completion of the manual use.
OPERATIONAL MODES
The Standard Mode is the default operational
mode preset from the factory. In order to program
the spa to operate in other modes you must enter
the programming mode to make the change.
NOTE: Freeze Protection (Smart Winter Mode) will
assert as necessary during all modes.
STANDARD MODE:
Is programmed to
maintain the desired temperature with periodic
water circulation (sampling) to sample and heat
the water to the set temperature.
ECONOMY MODE:
This will reduce the set
temperature of the spa by 11°C. Water sampling
and heating of the water is only done during the
filter cycles.
SLEEP MODE:
Water sampling and
heating is only done during the filter cycles
while trying to bring the spa water up to the
set temperature.
QUIET MODE:
Maintains temperature with
periodic sampling between the start of F1 and the
end of F2 while not allowing any water sampling
to happen between the end of F2 and the start
of F1.
To enter the programming screen and toggle
between Standard, Economy, Sleep and Quiet
Modes the following is required:
1. Press and hold the Light button for 5 sec-
onds.
2. Press the Light button several times until
ST, Ec, SL, or NT is displayed.
3. Use the Plus or Minus button to choose
between the Modes.
ST = Standard Mode, Ec = Economy
Mode, SL Sleep = Mode and NT = Quiet
Mode.
4. Wait 15 seconds to allow the exit timer to
expire and store the setting.
OFF MODE:
This mode allows you to stop all
spa functions for 30 minutes to perform quick spa
maintenance. To place the spa in OFF MODE,
press and hold the Jets button for 5 seconds.
The display will toggle between OFF and water
temperature when in the OFF MODE. To stop the
OFF MODE before the 30 minute cycle time is
complete, simply tap (short press) the Jet button.
FAHRENHEIT/CELSIUS SETTING
T
o change water temperature display to either
Fahrenheit or Celsius, press and hold Light button
for 5 seconds until F1... is displayed. Press the
Light button several times until F or C is displayed.
Press the Plus or Minus button to change. Wait 15
seconds to allow the exit timer to expire and store
the setting.
SMART WINTER MODE
The Smart Winter Mode (SWM) is used to prevent
water from freezing in the plumbing of the spa. As
soon as there is a risk of freezing, this protection
automatically kicks in. The SWM protection will
turn back off only after 24 hours without a risk of
freezing. During this 24 hour period, the Smart
Winter Mode icon remains on; the icon blinks
when the purge is active.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fantasy Embrace 2019 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fantasy Embrace 2019 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info