500340
25
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
SERVICING  WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
25
Servicing
1 SERVICING
When servicing or replacing gas carrying components,
disconnect from the gas supply before commencing operation.
Check the appliance is gas sound after completion of service.
When checking for gas leaks do not use washing up liquid - this
can corrode. Use a product specifi cally manufactured for leak
detection.
Do not use re-conditioned or unauthorised gas controls.
Disconnect from the electricity supply before commencing
servicing, particularly before removing any of the following:
- control panel, side panels, hotplate tray or any electrical
components or covers.
Before electrical re-connection, check that the appliance is
electrically safe.
Note - References to LH and RH oven apply as viewed from the
front.
BEFORE SERVICING ANY GAS CARRYING COMPONENTS. TURN
OFF THE GAS SUPPLY.
2 To Remove the Hotplate
Disconnect the appliance from the electricity supply.
Pull the unit forward to gain access.
a) Remove the pan supports/hotplate accessories and
burner caps.
b) Remove the brass venturi in the centre of each hotplate
burner bezel.
c) Remove the bezel from the hotplate and disconnect the
spark ignition lead from the spark electrode.
d) Lift the hotplate clear of the appliance.
e) Replace in reverse order.
3 To Remove the Control Panel
Disconnect the appliance from the electricity supply.
a) Remove the pan supports/hotplate accessories and
burner caps.
b) Slacken the brass venturi at the centre of each burner.
c) Remove the control knobs from all taps.
d) Open both oven doors. Remove 3 fi xings on the top front
and 3 fi xings on the control panel underside.
e) Pull the control panel forward. Remove the connections
from the rear of the three neons. Disconnect the earth
lead and lift the panel clear of the unit.
f) Replace all parts in reverse order.
g) When replacing any electrical connections refer to the
wiring diagram.
4 To Remove an Outer Side Panel
Disconnect the appliance from the electricity supply.
a) Remove the control panel as detailed in Section 3
b) Remove the retaining screw on the upper front edge
and the two fi xings on the rear or the side panel. Undo
the lower retaining screw situated below the edge at the
panel front corner.
c) Remove the panel by pulling it away from the unit.
Should diffi culty be encountered, it may be necessary to
slacken the two closest burners and both brass venturi as
detailed in Section 2.
d) Replace parts in reverse order. Ensure that both venturis
are fully tightened.
5 To Remove an Oven Neon
Disconnect the appliance from the electricity supply.
a) Remove the control panel as detailed in Section 3
b) Remove the relevant neon connection and undo the nut
which secures the neon to the control panel.
c) Replace parts in reverse order. Ensure the replacement
neon functions correctly.
6 To Remove a Thermostat
Disconnect the appliance from the electricity supply.
Remove the hotplate - see 2. Remove the control panel - see 3.
Open the appropriate oven door and remove the oven shelves.
Pull the appliance forward to gain access to the rear cover box.
Undo the cover screws and lift clear.
Right Hand oven
Remove the two fi xings that secure the thermostat phial cover.
Unclip the thermostat phial from the clips in the oven back
panel.
Left Hand oven
Remove the two screws holding the thermostat phial to the
oven fan cover at the rear of the oven. Pull the unit forward
to access the rear of the cooker. Remove the cover boxes
by removing the fi xing screws and lifting clear. Feed the
thermostat capillary clear of the oven.
Disconnect the wires from the thermostat and undo the two
xings that secure the control to the mounting plate.
Fit the replacement and re-assemble in reverse order. Ensure
that the phial is clipped to the oven rear, positioned centrally
between the clips. Check that the thermostat functions
correctly.
7 To Remove an Oven Cut-Off Thermostat
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to gain access to the cover box.
Undo the cover screws and lift clear.
b) The control is located on the earth plate beside the oven
element connections.
c) Disconnect the thermostat wiring. Undo the fi xings that
secure the thermostat to the earth plate and remove.
d) Fit replacement control and re-assemble parts in reverse
order.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Falcon De Luxe 1092 Continental bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Falcon De Luxe 1092 Continental in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Falcon De Luxe 1092 Continental

Falcon De Luxe 1092 Continental Gebruiksaanwijzing - Nederlands - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info