The motor protection filter is located behind the dust bag
in the dust chamber.
1. Open the dust bag cover by pulling the release button (F)
and remove the dust bag.
2. Unlock the motor protection filter grid and remove the
motor protection filter, insert a new filter and close the grid
again.
3. Reinsert the dust bag and close the dust bag cover until it
clicks
The EPA-filter is located under the exhaust air grid on the rear
of the appliance.
1. Release the exhaust air grid by pushing the slide button
side wards in arrow direction.
2. Remove the old EPA-filter and replace it by a new one.
3. Reinsert the exhaust air grid until it clicks into place.
EPA = E
FFICIENCY PARTICULATE AIR FILTER
15
Changing motor protection
filter
EPA-Filter wechseln
H
CLEANING AND MAINTENANCE
Change cycle, EPA-filter after approx. 6 months.
NOTE!
Change cycle, motor protection filter - after the consump-
tion of approx. 5 dust bags.
NOTE!
en
ATTENTION! *Cut to size motor protection filter
If the motor protection filter contained in the package of re-
placement dust bags is too big, cut it precisely to the di-
mension required for your vacuum cleaner. Make sure that
the motor protection filter fits perfectly the opening of the va-
cuum motor and does not allow any dust to get in.
