12
1. Insert the required nozzle into the telescopic tube or
handle.
2. Pull out the power supply cable until the required length is
reached. A yellow mark on the cable shows you that the
maximum cable length has almost been reached. The ma-
ximum cable length is shown by a red mark on the cable.
Never pull the cable out of the appliance beyond the red
mark.
3. Press the pedal button ON-OFF “ [B] “ to switch on the va-
cuum cleaner. Press the pedal button cable rewind “ [A] “
to retract the cable.
4. Set the required suction level by using the suction power
regulator [C].
ACCESSORIES / OPERATING
Vacuum cleaning
In case of full dust bin, as well as filters and with clogged up accessories (hose, tube, nozz-
les), the filter exchange indicator “ [D] “ lights up. In order to make an accurate evaluation,
press press the switch on the maximum vacuum power position and lift the floor suction nozzle
from the floor. In this case, replace the dust bag and/or the clogged filters or remove the stop-
page.
NOTICE!
WARNING!
Always check the appliance and the power cable before use.
Faulty appliances may cause injury and should not be used.
Dust bin and filter change
indicator
en
A
C
B
D
