485594
13
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
Remove the water tank from the cof-
fee machine (Fig. 7).
Fill the water tank with fresh cold
water (Fig. 8).
Pour only fresh cold water in the water
tank. Never put in other liquids, e.g.
mineral water or milk.
Replace the water tank (Fig. 7). Press
the tank firmly in, to ensure that the
water tank valve opens.
If for instance, water has to be refilled
during coffee dispensing, the „Fill
water tank“ indicator (Fig. 3, k)
flashes, the display indicates «REFILL
WATER». Coffee preparation is inter-
rupted. Fill the water tank!
To always be sure of a rich coffee, with
a full aroma, you should:
change the water in the water tank
daily,
wash the water tank at least once per
week in normal washing-up water (not
in the dishwasher). Then rinse with
fresh water.
5.3 Switching on for the first time
When you place the machine in use for
the first time, the automatic switching
on process only continues if you have
selected the desired language.
Switch on the machine with the „On/
Off“ key (Fig. 3, h) (Fig. 9). The red
indicator light comes on
The machine is set at the factory to the
display language «ENGLISH».
To select a different language, proceed
with „Setting language“ page 45.
If you wish to select «ENGLISH»,
press the „OK“ key (Fig. 3, g). English is
now programmed.
After programming the display returns
automatically in the main menu to the
menu point «LANGUAGE».
To start the switching on process, press
the „Menu“ key (Fig. 3, f) or wait
ca. 30 sec. For the machine to auto-
matically start with the switching on
process.
The display briefly indicates «Xperta».
The machine now heats up (display
indication «UNIT HEATS») and sub-
sequently performs a rinsing cycle (dis-
play indication «UNIT RINSES»). On
completion of the rinsing cycle, the
machine is ready for use. The display
indication now appears according to
the basic setting.
5.4 Switching on the machine
Each time before switching on, make
sure there is water in the water tank
and replenish if necessary. The machine
requires water for the automatic rins-
ing cycles with each switching on and
switching off process.
Switch the machine on with the „On/
Off“ key (Fig. 3, h) (Fig. 9). The red
indicator light comes on, the display
indicates briefly «Xperta».
Immediately after being switched on
the machine runs through a set-up
cycle. The noises occurring are per-
fectly normal.
During the heating-up phase (ca.
60 seconds) the „Coffee machine heat-
ing“ indicator (Fig. 3, i) flashes (dis-
play indication «UNIT HEATS»).
After the operating temperature has
been reached, the coffee machine car-
ries out an automatic rinsing cycle.
(display indication «UNIT RINSES»).
The water flows into the drip tray. The
„Unit heats“ indicator (Fig. 3, i) lights
continuously.
The coffee machine is now ready to
use. The indication shown in the dis-
play depends on the last selected cof-
fee mode.
GB
13
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fagor CAT 44NG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fagor CAT 44NG in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 10,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info