525628
9
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
> > > > 8
UK IRL
2.3 PREPARATION
The heater can be installed in a range of positions in relation to the fireplace:
The heater can be installed immediately behind the fireplace. In this case, the back
of the fireplace is the front of the heater
The heater can be installed further behind the fireplace. For example, 8 cm if the
mantle or column is made of Durox blocks or stones. The rear of the fireplace is 8
cm from the front of the heater. This means that you must order wider filler pieces
in order to bring the rear of the fireplace or uprights flush with the heater
The heater can be installed in the fireplace. In this case, it is important to know
how far inside the fireplace the heater is installed, since different filler pieces will
be needed. The location of the heater is in turn dependent upon the location of this
heater's smoke outlet or flue and the thickness of the mantle
When installing the natural stone fireplace, always make sure that the base is level
(preferably, perfectly horizontal), clean and, above all, stable.
Carefully remove the fireplace from the wooden crate in which it is delivered.
Check that all the parts supplied in the crate are complete and undamaged. Lay
them out in a safe place, so that you have a clear idea of what the various parts
are.
As far as possible, measure the dimensions using the drawing of the fireplace (see
Appendices).
Smooth the floor using a suitable screed. Be careful with limestone fireplaces, you
may have to seal the hearth or lay plastic sheet underneath to reduce the risk of
staining. Grey cement will stain the natural stone, use only white cement. When
using Knauff (for example, to insert a plate), blistering may occur in some dark
types of natural stone. An alternative is to apply a decelerator to the plaster.
With a parquet floor, it is advisable to cut away the parquet to the size of the
hearth, less 2 cm (left, right and front). If the parquet has not yet been fitted, you
can place the hearth above it, so that the parquet can be fitted approximately 2
cm underneath.
We recommend that you first conduct a 'dry run' of the fireplace assembly. Among
other things, this will allow you to see how the various parts fit together.
It is also recommended that you fit the fireplace first and then, if necessary,
plaster around it.
If necessary, you can smooth out the fireplace components using stainless steel
rings.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Faber Wirdum 770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Faber Wirdum 770 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info