560694
17
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
15
C850 532015 Rev. A
FSW OP
FSW CL
RCL
FCCFCO
FSW CL
EF
ROP
INVERTER
L
LIMIT SWITCH UNIT
ENGLISH
To connect the
photocells and
safety devices,
refer to paragraph
11.4.2.
Fig. 28
11.4.1 TERMINAL BOARD J1 - ACCESSORIES (FIG. 28)
J6=FCC - FCO - Manoeuvre stop command.
J5=RCL - Start of closing deceleration.
J3=ROP - Start of opening deceleration.
LOOP 1 - LOOP 1 magnetic loop (OPEN - terminals 1-2): for OPENING.
LOOP 2 - LOOP 2 magnetic loop (SAFETY/CLOSE - terminals 3-4): for SAFETY/CLOSING.
EF - Electrical stopping brake for motor locking.
OPEN - “Open” command (N.O. - terminal 5): means any pulse generator (e.g.: button) which, by closing a contact, commands
opening and/or closing of the gate.
CLOSE - “Close” command (N.O. - terminal 6): means any pulse generator (e.g.: button) which, by closing a contact, commands
closing of the gate.
FSW CL - Safety contact when closing (N.C. - terminal 7): he purpose of the closing safety devices when closing is to protect the
area affected by the movement of the gate during the closing phase, reversing the motion. They never trip during the opening cycle.
The CLOSING SAFETY DEVICES, if tripped when the automated system is open, will prevent the closing movement.
If CLOSING safety devices are not connected, jumper terminals FSW CL and GND (Fig. 32).
NOTE: If this connection is made, it will not be possible to use the FAILSAFE control.
STOP - STOP contact (N.C. - terminal 8): means any device (e.g.: button) which, by opening a contact, can stop movement of
the automated system.
If STOP devices are not connected, jumper terminals STOP and GND (Fig. 32).
FSW OP - Safety contact when closing (N.C. - terminal 9): the purpose of the opening safety devices when opening is to protect
the area affected by the movement of the gate during the opening phase, reversing its motion. They never trip during the closing
cycle. The OPENING SAFETY DEVICES, if tripped when the automated system is closed, will prevent the opening movement.
If OPENING safety devices are not connected, jumper terminals FSW OP and GND (Fig. 32).
GND (terminals 10-11-19) - Accessories power supply negative
24 VDC (terminals 12-13) - Accessories power supply positive
The max. load of the accessories is 500 mA. To calculate absorption, refer to the instructions included with
the individual accessories.
OUT 1 - DECELERATION COMMAND (terminal 14): signal telling the inverter that deceleration has begun.
OUT 2 - CLOSE COMMAND (terminal 15): signal telling the inverter that the gate is closing.
OUT 3 - OPEN COMMAND (terminal 16): signal telling the inverter that the gate is opening.
To avoid compromising correct system operation, do not exceed the power indicated in fig. 28.
OUT 4 - Output 4 open-collector +24 VDC (terminal 18): the output can be set in one of the functions described in Advanced
Programming Level (par. 11.5.2.). The default value for ALL PRE-SETTINGS is BUS COMMUNICATION.
Maximum load: 24 VDC with 100 mA.
60 W max
230 V~
230 V
~
50/60 Hz
11.4 ELECTRICAL CONNECTIONS
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw FAAC C850 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van FAAC C850 in de taal/talen: Engels als bijlage per email.

De handleiding is 13,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info