811738
21
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
21ENGLISH
AIR ZONE CONTROL GIUSY PLUS EVO 2.0 ONLY
This menu allows you to enable the AIR ZONE CONTROL mode. Range: (ON, OFF)
If ON is selected, the stove will optimise the adjustment so that the heat is sent to the air ducting when the main room temperature set is
reached.
CONTROLS PROCEDURE
Press key 6.
Press 3 until AIR ZONE CONTROL appears and conrm by pressing 6.
Use keys 4 -5 to enable (ON) or disable (OFF)
Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.
When the function is active, AIR ZONE CONTROL appears on the display
WARNINGS: If the appliance is installed with air ducting active, but ambient probe or thermostat for air ducting (i.e. the jumper is
kept on the ducting terminal), and the AIR ZONE CONTROL function is activated, it sends heat into the ducting regardless of the
temperature of the room receiving the ducting.
FRONT AIR
This menu allows you to set the front air motor speed. Range: (COMFORT, AUTO).
When COMFORT mode is selected, the front air speed is reduced with respect to AUTO mode.
CONTROLS PROCEDURE
Press key 6.
Conrm FRONT AIR by pressing key 6.
Use keys 4-5 to set the desired mode.
Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.
AIR DUCTING GIUSY PLUS EVO 2.0 ONLY
This menu allows you to set the ducting motor speed. Range: (COMFORT, AUTO).
When COMFORT mode is selected, the front air speed is reduced.
SET CONTROLS PROCEDURE
Press key 6.
Press 3 until AIR DUCTING appears and conrm by pressing 6.
Use keys 4-5 to set the desired mode.
Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.
By connecting an external NTC probe to the input, it is possible to adjust the TEMPERATURE.
TEMPERATURE CONTROLS PROCEDURE
Press key 6.
Press 3 until AIR DUCTING appears and conrm by pressing 6.
Press 3 until TEMPERATURE appears and conrm by pressing 6.
Use keys 4-5 to set the desired mode.
Press 6 to conrm or 1 to return to the previous menu to the initial state.
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering
pellet quality. By using the EASY SETUP function, it is possible to dose the pellets by increasing or decreasing the preset values.
In the stove program, the available values range from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value, which
is 0.
If you notice an excessive deposit in the burn pot, access the EASY SETUP program and lower the value by one unit to “- 1”; then wait until
the next day and if there is no improvement, decrease again, to a maximum of “- 3”.
If, on the other hand, it is necessary to increase the pellet dosage, switch the factory value from "0" to "+ 1, + 2, + 3" as required.
EXCESSIVE PELLET DEPOSIT IN BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN BURN POT
-3 -2 -1 0 +1 +2 +3
THIRD
DECREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
SECOND
DECREASE
RANGE IF
THE FIRST IS
INSUFFICIENT
FIRST DECREASE
RANGE (TEST
FOR 1 DAY)
OPTIMAL FACTORY
VALUE FIRST INCREASE
RANGE
SECOND
INCREASE
RANGE IF
THE FIRST IS
INSUFFICIENT
THIRD INCREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Extraflame GIUSY EVO 2.0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Extraflame GIUSY EVO 2.0 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Extraflame GIUSY EVO 2.0

Extraflame GIUSY EVO 2.0 Gebruiksaanwijzing - Nederlands - 36 pagina's

Extraflame GIUSY EVO 2.0 Gebruiksaanwijzing - Deutsch - 36 pagina's

Extraflame GIUSY EVO 2.0 Gebruiksaanwijzing - Français - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info