During cold storage function, air will be moved at high speed and the louvres will be at the maximum
discharge angle . The stored heat is currently being dissipated from the water . Open the doors and
windows in a small room for ventilation. Do not activate the cold storage function in the room that you
want to cool. A lot of heat will be blown into the room during the cold storage function.
- The actual water temperature in the water reservoir is displayed during cold
storage.
- The air inlet and air outlet must not be covered.
7. Heat storage
1. Press 【mode】to select the heatstorage mode.
2. Upon completion of the heat storage function, the air conditioner will automatically
switch to standby mode.
Pay attention:
During the heat storage function, the air exhaust fan is closed and no air will be blown out of the mobile
air conditioner.
- The actual temperature of the water in the tank is displayed during heat storage.
8. Heating
1. Press 【mode】to select heating mode .
2. Press【+】or 【-】to set the desired temperature. Set the temperature between the
6 and 32 ℃ ℃.
3. Press 【wind speed】to set the desired speed. There are three positions: low, high or
automatic .
4. Press【swing wind】to set the discharge blades in the correct position. The slats can
move up and down automatically in the swing position and can be locked in the desired position.
Pay attention:
During heating , the actual temperature of the water in the water tank is displayed.
When the heating capacity of the water in the water tank is used up (water temperature is 2 ° C), the
air conditioning automatically stops heating . The water should then on to heat up , in order to be able
