User instructions :
Follow the steps below:
1. Switch on the mobile air conditioner for the first time , press the 【power】key
and connect the mobile air conditioner to the filling hose on the filling valve according to
the spoken message.
2. Move the mobile air conditioner carefully to prevent collisions and falls.
3. Do not stack things on the air inlet / outlet of the machine.
There must be a minimum clearance of 500 mm between the air inlet / outlet and the
surrounding objects and keep the air inlet / outlet free to prevent the air exchange of the
machine's air inlet / outlet from being affected.
1. To clean and maintain the machine, use a soft cloth to wipe the machine. Do not
use wax, thinner or irritant cleaner.
2. Clean the filter regularly. It is recommended to clean the filter every two weeks.
3. Remove the plug from the wall socket and drain the water in the water tank if
the machine will not be used for a longer period of time.
4. Do not disassemble or repair the machine without professional maintenance
personnel.
Important usage instructions:
1. For cold / heat storage ( cold / heat storage company), open doors and windows
for ventilation.
2. After the function switch, the compressor enters the protection status. You must
wait 3 minutes before the compressor can operate normally.
3. At the moment that the compressor starts there may be an increased noise level
temporarily, after starting the compressor this noise will be gone.
4. After draining the water from the mobile air conditioner you must disconnect the
drain hose and screw the screw cap back on the machine. If you do not remove the hose
or replace the cap, water will continue to flow from the drain.
5. Even if the machine's drain function is used to drain the water in the tank, the
water cannot be drained completely. Therefore, the machine must be upright and not
laid flat when moving, carrying and storing . If the mobile air conditioner has nevertheless
been lying flat, wait 24 hours before switching the device on again.
In use mobile air conditioning:
1. Connect the power supply
1. Connect the power supply for the first use and refer to step 2 "Filling water"
2. Insert the plug into the socket and press the 【power】button on the control panel if
it is not being used for the first time or if there is water in the water tank.
