ASSEMBLY INSTRUCTIONS
STEP 6
Attach the ROWING ARM(43) to the CENTER BEAM(2) with BUTTON HEAD BOLT(M10x1.5x80mm)(26),
WASHERS(M10)(27), and NYLOCK NUT(M10x1.5)(28). Connect the SHOCK(10) to one of the adjustment
holes on theR OWING ARM(43) and secure with theLOCKING KNOB(44) and theADJUSTMENT
KNOB(45). Refer to the detail view below. The shoulder of the LOCKING KNOB(44) and end of the
ADJUSTMENT KNOB(45) must be inserted into one of the adjustment holes.
STEP 7
Insert the HANDLEBAR(6)through the tube on the top of the ROWING ARM(4). ress two HAND GRIPS(9)
onto both ends of the HANDLEBAR(6).
STEP 8
Install aAA battery into the METER(8), the battery is not included .ee page 11 for detailed battery installation
instructions. Slide the METER(8) onto the plate on the ROWING ARM(4).
Shoulder of the
Locking Knob.
Adjustment
Holes
End of the
Adjustment Knob.
9