668834
27
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
Second phase. Ignition
After the preparation phase, the display will show the message "LOAD PELLETS" and ignition
will begin. This second phase is divided in two parts: pre-loading and actual ignition. First, the pellet
feed screw is activated (the Feed screw ON LED lights up) for a variable time interval,
depending on the model, and pellets begin to fall inside the brazier. (Remember that the brazier
must be perfectly clean at this beginning of this stage). Once this "pre-loading" phase is
completed, the pellet feed screw will stop for a variable amount of time depending on the model
(from two to three minutes). After this waiting phase, the pellet feed screw will start to switch on at
regular intervals and pellets will then continue falling inside the stove brazier, while the glow plug
and then fume exhaust fan will both remain activated.
As soon as the pellets cover the glow plug hole, you will notice first a reddening and then the
onset of a small flame in the brazier.
If pellets continue to fill the brazier without this happening, manually stop the ignition process
without waiting for the stove to set off an alarm: "AL 5 NO START".
This second phase is completed when the stove detects successful triggering of the combustion
process, or rather after 4-5 minutes from the triggering of the first flame.
If combustion is not detected within a given amount of time, the no start-up alarm will be activated
("AL 5 NO START" message).
Third phase. Stabilisation
Once combustion triggering has been detected, the third phase will start and the display will show
the message "FIRE PRESENT". Pellet feeding is reduced and ventilation increased in order to
allow a stabilisation of the flame and disposal of excess pellets accumulated in the brazier during
the ignition phase. This phase lasts about 5 minutes.
Once the stabilisation phase has been completed ("FIRE PRESENT"), the stove passes to the
normal working phase.
6.3.2 No start-up
As said, if the onset of combustion is not detected, the no start-up alarm will be set off. The display
will show the message "AL 5 NO START" and an acoustic signal will be heard at regular intervals
(if the buzzer function is active in Menu 6).
To disable the alarm, hold and press the ON-OFF (4) (about 2 secondi) . The acoustic alarm
will stop and the stove will return to "FINAL CLEANING" status and then to "OFF."
Before starting another ignition cycle:
- Verify the cause of the alarm.
In particular:
Verify that the pellet tank is not empty.
Verify that the brazier is in the right position.
Remove the unburned pellets from the brazier (VERY IMPORTANT).
If the device does not ignite regularly, the main cause may be insufficient maintenance or poor
pellet quality.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eva Calor Hydro Slim 16 kW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eva Calor Hydro Slim 16 kW in de taal/talen: Engels als bijlage per email.

De handleiding is 5,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info