668834
17
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
4.5 Fume exhaust duct
4.5.1 General notes
CAUTION: the pellet stove is not like other stoves. Fume draft is forced thanks to a fan that
maintains the pressure in the combustion chamber and slight pressure around the exhaust
duct. Therefore, you must verify that the latter is completely watertight and properly installed,
both from the point of view of function and safety.
Construction of the exhaust duct must be done by specialised personnel or companies, as reported
in the following manual. Always create the exhaust system so that periodic cleaning is assured
without having to dismantle any parts.
Tubes must ALWAYS be sealed with silicone (no cementing) that maintains resistance and
elasticity characteristics at high temperature (250°C) and are to be secured with a Ø3.9mm self-
tapping screw.
- The installation of dampers or valves which may obstruct the passage of exhaust fumes is
prohibited.
- Installation in a chimney flue where exhausted fumes or vapours from other equipment (boilers,
hoods, etc.) is prohibited.
4.5.2 Tubes and maximum usable lengths
Painted aluminised steel tubes (minimum thickness 1.5 mm), stainless steel tubes (Aisi 316) or
porcelain tubes (minimum thickness 0.5 mm) with a nominal diameter of 80 mm or 100 mm (for
tubes inside the chimney flue max 150 mm) can be used.
Flexible hoses are permitted if they fall within the limits prescribed by law (in stainless steel with
smooth inner wall). The male-female connection collars must be at least 50 mm long.
Tube diameter depends on the type of system. The stove has been designed for Ø 80 mm and Ø
100 mm tubes (check the technical data sheet of the selected model). As can be seen in the table
below, a double-wall Ø 100 mm tube may be necessary in some cases and models.
TYPE OF SYSTEM WITH Ø 80 mm TUBE
WITH DOUBLE-WALL Ø
100 mm TUBE
Minimum length 1.5 m 2m
Maximum length (with 3 90° curves) 4.5 m 8m
For installations situated over 1200 m above
sea level
- mandatory
Maximum number of curves 3 4
Horizontal sections with min. 5% incline 2m 2m
NOTE: load losses of a 90° curve can be equated with those of 1 metre of tube; the serviceable T-
connection is to be considered as a 90° curve.
Fig.9 Fig. 10
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eva Calor Hydro Slim 16 kW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eva Calor Hydro Slim 16 kW in de taal/talen: Engels als bijlage per email.

De handleiding is 5,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info