IMPORTANT INFORMATION
This manual has been prepared by the manufacturer and is an integral and essential part of the
product. In the event of sale or transfer of the product, always ensure the presence of the manual as
the information it contains is addressed to the purchaser and to all those various people involved in
the installation, use and maintenance of the product. Carefully read the instructions and information
contained in this manual before installation, operation and maintenance of the product. The
instructions contained in this instruction manual guarantee the safety of persons and property and
ensure efficient operation and a longer service life. The manufacturer declines all responsibility for
damage caused by failure to observe instructions regarding installation, use and maintenance listed
in the instruction manual, for unauthorised modifications or non-original replacement parts. Product
installation and use must be carried out in accordance with the manufacturer's instructions and in
compliance with European, national and local regulations. Installation, electrical connection,
functional testing, maintenance and repairs are operations that must be performed by qualified and
licensed personnel who must have appropriate knowledge of the product. Product installation must
not be carried out close to walls made of wood or combustible material. For proper installation, you
must observe the following "Safety distances" section. Verify the exact flatness of the floor where
you will install the product. When handling the steel parts of the cladding, use clean cotton gloves to
avoid leaving difficult to remove fingerprints for the first cleaning. Stove installation must be
performed by at least two people. Connect the stove to the mains only after proper professional
connection to the chimney flue. The power cable plug must remain accessible after installation of
the stove. Only operate the stove with regulation wood pellets (refer to the "FUEL" chapter). Never
use liquid fuels to operate the pellet stove or to stoke the embers present. Provide adequate
ventilation in the installation area throughout the year. In the presence of operation failures, fuel
supply will be interrupted. Re-start the unit after removing the cause of the failure. Discontinue use
of the product in the event of failure or malfunction. Do not remove the safety guard located in the
pellet tank. Any accumulated unburned pellets in the burner as a result of repeated "failed ignitions
must be removed prior to ignition." Pellet stove operation can cause very hot heating of the handles,
the chimney flue and glass surfaces. Only touch these parts during operation when wearing
protective clothing or with adequate aids. Because of the creation of heat on the glass, make sure
that no persons unfamiliar with stove operation stand in the installation area. Inform children of the
precautions to be observed during product operation and of possible dangers. In the event of
problems or misunderstanding of the instructions manual, contact your dealer. Placing objects which
cannot withstand heat on the stove or within the minimum required safety range is prohibited. Do not
open the door during operation or operate the stove with its glass broken. For product terms,
limitations and exclusions, please refer to the warranty included with the product. In order to pursue
a policy of constant product development and renewal, the manufacturer may make changes to it as
deems appropriate without notice. This document is the property of the manufacturer and cannot be
disclosed in whole or in part to any third party without the written consent of the company, which
reserves all rights to the rigor of the law.
GUIDELINES AND STANDARDS
All our products are manufactured according to
the following guidelines:
in compliance with the following standards:
89/366 CEE
2004/108 CE
2006/95 CE
89/106 CEE
EN 60335-1; EN 60335-2-102
EN 61000-3-2; EN 61000-3-3
EN 50366; EN 55014-1 ; 55014-2
EN 14785 *; EN 303-5 *
* depending on model
1
GENERAL STANDARDS ........................................................................................... 4
1.1 Fireplace or Chimney flue .................................................................................................. 5
1.2 Chimney pot ...................................................................................................................... 5
1.3 External air intake vent ...................................................................................................... 7
