11.1.The Stove Panel
There are two displays available with different sizes but the same functions.
11.1.1 Panel description.
1) Use this button to enter the working programme setting. During setting, press it to move to the next menu item or
increase the displayed value.
2) Use this button to enter the working temperature setting. During setting, press it to go back to the previous menu item or
decrease the displayed value.
3) TIMER LED: It is on when the programmer timer setting is enabled.
4) TEMP OK LED: It is on when the stove reaches the room temperature. The stove then continues the heating in ECO mode.
5) DISPLAY LED: It indicates the stove working status and the setting menu.
6) AUGER TUBE LED: It is on when the Auger tube is working.
7) IGN LED: It is on when the ignition plug is on.
8) ON/OFF: It is the stove switching on/off button. Keep it down for a few seconds to switch the stove on. Press it also to clear
the alarm displayed. During temperature setting, press it to enter the technical menu.
9) LED ON: It is on when the stove is switching on or heating. It flashes when the stove is in the cooling phase or error.
10) IR: Optional IR remote control sensor.
11) AL: It is on or flashes if the pressure switch or the safety thermostat were triggered.
11.2. User functions
The board automatically controls the stove working parameters. Users can manually switch the stove on or off and use
the advanced functions, such as the weekly programmer or the timer.
11.2.1 First ignition
Upon switching on the board, the display shows the resident software version and then the stove status (OFF in case of
first ignition).
