Step 5 Tighten the plastic screw cap (that affixes the fan blade) of the fan axle.
Attention: you must turn it clockwise to dismount the screw cap (to loosen
it).
Step 6 Tighten the threaded turnbuckle (that affixes the protective grill) of the
motor housing; turn it counter-clockwise to dismount the guard nut (to
loosen it).
Step 7 Place the rear protective grill against the front side of the motor housing
with the carrier bracket on the protective grill facing upwards. Make sure
that the positioning pins of the motor housing are placed correctly in the
slots of the protective grill.
Step 8 Now tighten the guard nut (that affixes the protective grill) firmly
clockwise onto the screw thread of the motor housing.
Step 9 Remove the PVC sleeve of the motor axle.
Step 10 Place the fan blade onto the motor axle. Important! Make sure that the
pins of the motor align properly with the appropriate recesses in the fan
blade.
Step 11 Tighten the plastic spinner (for affixing the fan blade) firmly counter-
clockwise onto the motor axle to secure the fan blade.
Step 12 Check to see that the fan blade rotates properly.
Step 13 Turn the screw of the locking ring almost entirely loose and loosely place
the plastic locking ring with the rear groove around the rear protective
grill.
Step 14 Now mount the rear protective grill in the front groove of the plastic
locking ring and tighten the screw firmly. Both protective grills are now
solidly connected to each other.
Drawing of the parts of XVT-16S
