Before every use, check that the voltage on the socket to be
used matches the voltage indicated on the device’s specification
plate: 23V / 50Hz.
Avoid the use of extension cables. If unavoidable, use an approved
cable with sufficient power. Completely unroll the cable.
The electrical cable may never come into contact with sharp, hot or
moving objects, must not be wound around the fan and must not
be bent or rolled up too tightly.
Always ensure that the floor is sturdy, flat and horizontal.
Do not leave a fan operating unsupervised in a room.
Never touch the device with wet hands!
Never hang things over the device. Ensure that curtains, clothing
etc do not come into the vicinity of the fan.
Never insert a finger, pen or any other object through the protective
grille when the fan is in use!
Never spray any products (anti-insect, cleaning agent etc) on or in
the fan.
Do not store or use the fan:
- in locations where it could become wet or fall into water;
- near flammable, explosive or gaseous substances;
- near acids, alkalis, oil or other corrosive substances.
Never connect the fan to a timer or dimmer.
Never immerse the device, cable or plug in liquid!
First turn off the fan and then remove the plug from the socket
before moving, cleaning or carrying out maintenance. Do that when
the fan is not in use as well.
Always remove the plug from the socket after use.
This device is not suitable to be used by children or persons with a
physical, sensual or mental disability or those who lack experience
and knowledge, irrespective of whether they are being supervised
or there is a responsible person present. Keep these persons and
household pets out of the vicinity of the fan.
This device should only be used for the purposes set out in the
booklet. Any other usage may be dangerous (could cause fire,
injury, damage, electric shock etc), will invalidate the guarantee -
Do not leave a fan operating unsupervised in a room.
