474862
15
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
15
between the fireplace and the side walls, at least 100 cm. between the fireplace and the ceiling. Do not hang
the device directly under or in front of an electrical socket (see diagram 1).
The wall supports must be attached horizontally (use a spirit level!) to the wall. Determine the location of the
wall supports (take the above into account), mark the location of the screws and drill 4 holes at the marked
places using a 6 mm drill. Put the plugs into the holes and then screw the wall supports to the wall. Be
aware of pipes that may be contained within the walls when drilling holes!
Attach the spacer bracket with both self-tapping screws underneath the fireplace in the holes provided. The
flat side of the bracket must be placed against the underside of the fireplace; the other must rest against the
wall so that the wall piece sticks out under the fireplace (diagram 3). This bracket will be hidden from sight
once the glass screen has been installed.
Now hang the fireplace carefully on the central wall support with the hanging bracket (see diagram 2). The
bracket should not stick out from the support! The electrical cable comes out at the right hand, lower side of
the fireplace and must be placed out of range of the heat.
Now mark the location at which the spacer bracket must be screwed to the wall. Remove the fireplace from
the wall, drill both holes and insert a plug. Hang the fireplace on the bracket and screw the spacer bracket to
the wall.
Hang the glass plate (two people are needed for this job!) with the four hooks over the four knobs on the
sides of the fireplace and check that all four hooks are correctly attached (see diagram 4). Secure the glass
plate by tightening the screw that goes through the bracket (which sits on the glass plate).
Installation is now complete.
Note: ensure that the weight of the fireplace
hangs on the wall supports
and not on the spacer bracket!
Operating
Check that the details on the data plate correspond to those of the electrical supply which you wish to use
for the fireplace. Do not use the same connection for any other equipment.
Install two AAA batteries in the remote control.
Check that the main ON/OFF switch on the right hand, upper side of the fireplace is 'off' (the side with the
circle is depressed).
Now insert the plug into the socket.
Switch the fireplace on with the main ON/OFF switch (depress the side with the stripe). You can now further
operate the fireplace with the remote control or with the buttons on the fireplace itself.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Eurom-Siena

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eurom Siena bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eurom Siena in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info