591575
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
13
If there is insufficient supervision of a pump that is functioning automatically, the pump may
break down despite the presence of the overheating safeguard. The user is always responsible
for supervising the device!
MAINTENANCE
Before you carry out checking or cleaning tasks on the pump you must switch it off and
remove the plug from the socket.
Your submersible pump is more or less maintenance-free. The only tasks you must carry out
are as follows:
Carry out a regular visual inspection. Make sure the pump is not damaged. Check the
electrical cable, the plug, the float switch and the float cable for damage too. If you discover
damage, you must take the device to your supplier or an accredited professional. Never
attempt to carry out repairs yourself and never open the pump!
Regularly check that the float switch is working effectively, particularly if you have set the
pump to work automatically.
Regularly remove residues from the float with clean water.
Regularly check (by putting your fingers into the suction openings) whether any dirt (fibres,
residues) has accumulated around the blade. Remove it if this is the case. If you cannot do
so, take the pump to your supplier or to an accredited professional to open the device and
remove the residue.
If you regularly use the pump at different locations, you must rinse with clean water (inside
and out) after each use.
Keep the base of the well (or the tile on which the pump is positioned) free from mud and
residue.
Ensure that the pump does not freeze. Before winter sets in, run the pump dry and store it in
a frost-free location.
DEFECTS CAUSES SOLUTIONS
Defects
Causes
Solutions
Pump does not start
- No electricity
- Float does not switch
- Check electrical supply
- Place the float in a higher position
Pump runs but does
not pump water
- Inlet openings are clogged
- Water drainage pipe is bent or
hose is blocked
- Air around the blade
- Blade is jammed
- Water level is too low (manual
usage)
- Clean them
- Straighten the hose or remove the
blockage
- Switch the pump off and move it from
side to side. Wait until the air has
escaped and switch on again
- Try to remove the blockage or ask a
professional to do so
- Submerge the pump in deeper water
Pump does not switch
off
- Float cannot sink
- Give the float more space
Insufficient water
- Inlet openings are (partially)
blocked
- Too little pumping capacity due
to contamination and dirty
water
- Clean them
- Clean the pump and replace worn
out parts
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eurom SPV1100I bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eurom SPV1100I in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info