EN
1. Introduction
The SL20 Cube hose reel is intended for household use such as the spraying of gardens, car
washing, etc. You must therefore not use it for other purposes.
The reel is produced from high quality materials and parts. It is equipped with a:
stop-where-you-want-system: it is simple to roll out the hose to any desired length (possibly
with an extension) and lock it, and then roll the hose up again automatically
safe-return-system: the hose rolls up at a speed that prevents the end whipping around
dangerously.
The hose on the EUROM SL20 Cube is 20 metres long.
The mounting bracket can be used to fasten the reel to a wall. The fact that the reel can revolve
180° in relation to the wall means that a minimum amount of space is required.
2. Description
A. Handle
B. Hose stopper
C. Hose
D. Quick coupling hose/nozzle
E. Nozzle
F. Wall support
G. Housing
H. Water inlet hose
I. Quick coupling inlethose/tap
3. Installation
1. Select a suitable place for the reel: on a sturdy wall at around 80 cm above the ground and
near a tap. You must be able to fit the full length of the bolts firmly into the wall.
2. Secure the wall support vertically on the wall. Drill 4 suitable holes in the wall, insert the
plugs supplied and attach the wall support to the wall with the screws. (The wall support can
also be secured to another surface as long as it is strong enough to bear the reel. The
materials supplied are suitable for a brick wall.)
3. Now, you can hang the reel in the support. For that, insert the pin supplied through the reel
and support, see diagram.
4. Connect the quick coupling and the spray head with the hose.
5. Connect the quick coupling to the water inlet hose and the corresponding nipple to the tap.
6. Your reel is now fully installed and can rotate around 180°.
