55
• Hang the heater on a sturdy,
smooth, vertical wall made
from heat-resistant material.
• Determine where you will hang
the suspension frame; the
frame should be mounted
horizontally on the wall.
Position the suspension frame
so that the minimal distances
described in the picture above
are guaranteed when
positioning the heating panel.
Make sure to hang the
suspension frame upright (see
label “This side up” on the
suspension frame).
• Now mark the 4 places where the holes need to be drilled with the correct distance
between them and completely spirit-level.
1. 4x 10 mm hole
2. 4x wedge bolt
3. Suspension frame
• Drill the holes (10 mm) in the
marked places and place the
wedge bolts in the holes.
• Firmly screw the suspension
frame to the wall.
• Now hang the heating panel in
the suspension frame: the
suspension pegs of the panel go
through the eyes in the
suspension frame.
• Move the panel as far as possible to the right and then lower it as far as possible. The
panel is now hanging securely.